Journal Description
Photonics
Photonics
is an international, scientific, peer-reviewed, open access journal on the science and technology of optics and photonics, published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), Inspec, CAPlus / SciFinder, and other databases.
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 15.5 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Companion journal: Optics.
Impact Factor:
2.4 (2022);
5-Year Impact Factor:
2.4 (2022)
Latest Articles
Compact Low Loss Ribbed Asymmetric Multimode Interference Power Splitter
Photonics 2024, 11(5), 472; https://doi.org/10.3390/photonics11050472 - 17 May 2024
Abstract
Optical power splitters (OPSs) are utilized extensively in integrated photonic circuits, drawing significant interest in research on power splitters with adjustable splitting ratios. This paper introduces a compact, low-loss 1 × 2 asymmetric multimode interferometric (MMI) optical power splitter on a silicon-on-insulator (SOI)
[...] Read more.
Optical power splitters (OPSs) are utilized extensively in integrated photonic circuits, drawing significant interest in research on power splitters with adjustable splitting ratios. This paper introduces a compact, low-loss 1 × 2 asymmetric multimode interferometric (MMI) optical power splitter on a silicon-on-insulator (SOI) platform. The device is simulated using the finite difference method (FDM) and eigenmode expansion solver (EME). It is possible to attain various output power splitting ratios by making the geometry of the MMI central section asymmetric relative to the propagation axis. Six distinct optical power splitters are designed with unconventional splitting ratios in this paper, which substantiates that the device can achieve any power splitter ratios (PSRs) in the range of 95:5 to 50:50. The dimensions of the multimode section were established at 2.9 × (9.5–10.9) μm. Simulation results show a range of unique advantages of the device, including a low extra loss of less than 0.4 dB, good fabrication tolerance, and power splitting ratio fluctuation below 3% across the 1500 nm to 1600 nm wavelength span.
Full article
(This article belongs to the Special Issue Optical Fiber Communication Systems and Networks)
►
Show Figures
Open AccessArticle
Mechanical Assessment in Atherosclerosis Based on Photoacoustic Viscoelasticity Imaging
by
Xingchao Zhang, Xiaohan Shi, Hui Wu, Caixun Bai, Junshan Xiu and Yue Zhao
Photonics 2024, 11(5), 471; https://doi.org/10.3390/photonics11050471 - 17 May 2024
Abstract
Early identification of vulnerable plaques is a major challenge in diagnosis and assessment of atherosclerosis. In atherosclerotic plaque development, the proportion change in components caused plaque mechanical property change and induced plaque rupture. In this paper, a photoacoustic viscoelasticity imaging (PAVEI) technique was
[...] Read more.
Early identification of vulnerable plaques is a major challenge in diagnosis and assessment of atherosclerosis. In atherosclerotic plaque development, the proportion change in components caused plaque mechanical property change and induced plaque rupture. In this paper, a photoacoustic viscoelasticity imaging (PAVEI) technique was proposed to measure the viscosity–elasticity ratio of atherosclerotic plaque and evaluated for the potential in characterizing vulnerable plaques. Apolipoprotein E-knockout mice fed with a high-fat/high-cholesterol diet were chosen as the atherosclerotic model. Plaque component phantoms were examined to demonstrate the high efficiency of PAVEI in detecting the proportion change in components compared to single elasticity or viscosity detection. Finally, atherosclerotic plaques from mice aortas at different stages were imaged by PAVEI, which provided an insight into the compositional and functional characterization of vulnerability plaques and suggested its potential applications in the identification of high-risk plaques.
Full article
(This article belongs to the Special Issue Advanced Techniques in Biomedical Optical Imaging)
►▼
Show Figures
Figure 1
Open AccessArticle
Enhanced Photon-Pair Generation Based on Thin-Film Lithium Niobate Doubly Resonant Photonic Crystal Cavity
by
Jinmian Zhu, Fengli Liu, Fangheng Fu, Yuming Wei, Tiefeng Yang, Heyuan Guan and Huihui Lu
Photonics 2024, 11(5), 470; https://doi.org/10.3390/photonics11050470 - 17 May 2024
Abstract
In this work, a doubly resonant photonic crystal (PhC) cavity is proposed to enhance second harmonic generation (SHG) efficiency and photon pair generation rate (PGR). Through the exploration of geometry parameters, a band-edge mode within the light cone is identified as the first
[...] Read more.
In this work, a doubly resonant photonic crystal (PhC) cavity is proposed to enhance second harmonic generation (SHG) efficiency and photon pair generation rate (PGR). Through the exploration of geometry parameters, a band-edge mode within the light cone is identified as the first harmonic (FH) mode, and a band-edge mode outside the light cone is designated as the second harmonic (SH). Subsequently, by increasing the layers of the core region, a heterostructure PhC cavity is designed. The results showcase a doubly resonant PhC cavity achieving a 133/W SHG efficiency and a photon pair generation rate of 3.7 × 108/s. The exceptional conversion efficiency is attributed to the high quality factors Q observed in the FH and SH modes with values of approximately 280,000 and 2100, respectively. The remarkably high Q factors compensate for nonlinear efficiency degradation caused by detuning, simultaneously making the manufacturing process easier and more feasible. This work is anticipated to provide valuable insights into efficient nonlinear conversion and photon pair generation rates.
Full article
(This article belongs to the Special Issue Advances in Integrated Photonics)
►▼
Show Figures
Figure 1
Open AccessArticle
High-Q Multiband Narrowband Absorbers Based on Two-Dimensional Graphene Metamaterials
by
Aijun Zhu, Pengcheng Bu, Lei Cheng, Cong Hu and Rabi Mahapatra
Photonics 2024, 11(5), 469; https://doi.org/10.3390/photonics11050469 - 16 May 2024
Abstract
In this paper, an absorber with multi-band, tunable, high Q, and high sensitivity, based on terahertz periodic two-dimensional patterned graphene surface plasmon resonance (SPR), is proposed. The absorber consists of a bottom metal film separated by a periodically patterned graphene metamaterial structure and
[...] Read more.
In this paper, an absorber with multi-band, tunable, high Q, and high sensitivity, based on terahertz periodic two-dimensional patterned graphene surface plasmon resonance (SPR), is proposed. The absorber consists of a bottom metal film separated by a periodically patterned graphene metamaterial structure and a SiO2 dielectric layer, where the patterned graphene layer is etched by “+” and “L” shapes and circles. It has simple structural features that can greatly simplify the fabrication process. We have analyzed the optical properties of a graphene surface plasmon perfect metamaterial absorber based on graphene in the terahertz region using the finite-difference method in time domain (FDTD). The results show that the absorber device exhibits three perfect absorption peaks in the terahertz bands of f1 = 1.55 THz, f2 = 4.19 THz, and f3 = 6.92 THz, with absorption rates as high as 98.70%, 99.63%, and 99.42%, respectively. By discussing the effects of parameters such as the geometrical dimensions of patterned graphene metamaterial structure “+” width W1, “L” width W2, circular width R, and the thickness of the dielectric layer on the absorption performance of absorber, as well as investigating the chemical potential and relaxation time of patterned-layer graphene material, it was found that the amplitude of the absorption peaks and the frequency of resonance of absorber devices can be dynamically adjusted. Finally, we simulated the spectra as the surrounding refractive index n varied to better evaluate the sensing performance of the structure, yielding structural sensitivities up to 382 GHz/RIU. Based on this study, we find that the results of our research will open new doors for the use of multi-band, tunable, polarization-independent metamaterial absorbers that are insensitive to large-angle oblique incidence.
Full article
(This article belongs to the Special Issue Photonic Devices Based on Plasmonic or Dielectric Nanostructures)
Open AccessArticle
Compact Quantum Random Number Generator Based on a Laser Diode and a Hybrid Chip with Integrated Silicon Photonics
by
Xuyang Wang, Tao Zheng, Yanxiang Jia, Jin Huang, Xinyi Zhu, Yuqi Shi, Ning Wang, Zhenguo Lu, Jun Zou and Yongmin Li
Photonics 2024, 11(5), 468; https://doi.org/10.3390/photonics11050468 - 16 May 2024
Abstract
In this study, a compact and low-power-consumption quantum random number generator (QRNG) based on a laser diode and a hybrid chip with integrated silicon photonics is proposed and verified experimentally. The hybrid chip’s size is 8.8 × 2.6 × 1 ,
[...] Read more.
In this study, a compact and low-power-consumption quantum random number generator (QRNG) based on a laser diode and a hybrid chip with integrated silicon photonics is proposed and verified experimentally. The hybrid chip’s size is 8.8 × 2.6 × 1 , and the power of the entropy source is 80 mW. A common-mode rejection ratio greater than 40 dB was achieved using an optimized 1 × 2 multimode interferometer structure. A method for optimizing the quantum-to-classical noise ratio is presented. A quantum-to-classical noise ratio of approximately 9 dB was achieved when the photoelectron current is 1 A using a balance homodyne detector with a high dark current GeSi photodiode. The proposed QRNG has the potential for use in scenarios of moderate MHz random number generation speed, with low power, small volume, and low cost prioritized.
Full article
(This article belongs to the Topic Hybrid and Heterogeneous Integration on Photonic Circuits)
►▼
Show Figures
Figure 1
Open AccessArticle
Boundary Feedback Fiber Random Microcavity Laser Based on Disordered Cladding Structures
by
Hongyang Zhu, Bingquan Zhao, Zhi Liu, Zhen He, Lihong Dong, Hongyu Gao and Xiaoming Zhao
Photonics 2024, 11(5), 467; https://doi.org/10.3390/photonics11050467 - 16 May 2024
Abstract
The cavity form of complex microcavity lasers predominantly relies on disordered structures, whether found in nature or artificially prepared. These structures, characterized by disorder, facilitate random lasing through the feedback effect of the cavity boundary and the internal scattering medium via various mechanisms.
[...] Read more.
The cavity form of complex microcavity lasers predominantly relies on disordered structures, whether found in nature or artificially prepared. These structures, characterized by disorder, facilitate random lasing through the feedback effect of the cavity boundary and the internal scattering medium via various mechanisms. In this paper, we report on a random fiber laser employing a disordered scattering cladding medium affixed to the inner cladding of a hollow-core fiber. The internal flowing liquid gain establishes a stable liquid-core waveguide environment, enabling long-term directional coupling output for random laser emission. Through theoretical analysis and experimental validation, we demonstrate that controlling the disorder at the cavity boundary allows liquid-core fiber random microcavities to exhibit random lasing output with different mechanisms. This provides a broad platform for in-depth research into the generation and control of complex microcavity lasers, as well as the detection of scattered matter within micro- and nanostructures.
Full article
(This article belongs to the Special Issue Advancements in Fiber Lasers and Their Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
The Generation of Equal-Intensity and Multi-Focus Optical Vortices by a Composite Spiral Zone Plate
by
Huaping Zang, Jingzhe Li, Chenglong Zheng, Yongzhi Tian, Lai Wei, Quanping Fan, Shaoyi Wang, Chuanke Wang, Juan Xie and Leifeng Cao
Photonics 2024, 11(5), 466; https://doi.org/10.3390/photonics11050466 - 15 May 2024
Abstract
We propose a new vortex lens for producing multiple focused coaxial vortices with approximately equal intensities along the optical axis, termed equal-intensity multi-focus composite spiral zone plates (EMCSZPs). In this typical methodology, two concentric conventional spiral zone plates (SZPs) of different focal lengths
[...] Read more.
We propose a new vortex lens for producing multiple focused coaxial vortices with approximately equal intensities along the optical axis, termed equal-intensity multi-focus composite spiral zone plates (EMCSZPs). In this typical methodology, two concentric conventional spiral zone plates (SZPs) of different focal lengths were composited together and the alternate transparent and opaque zones were arranged with specific m-bonacci sequence. Based on the Fresnel–Kirchhoff diffraction theory, the focusing properties of the EMCSZPs were calculated in detail and the corresponding demonstration experiment was been carried out to verify our proposal. The investigations indicate that the EMCSZPs indeed exhibit superior performance, which accords well with our physical design. In addition, the topological charges (TCs) of the multi-focus vortices can be flexibly selected and controlled by optimizing the parameters of the zone plates. These findings which were demonstrated by the performed experiment may open new avenues towards improving the performance of biomedical imaging, quantum computation and optical manipulation.
Full article
(This article belongs to the Special Issue Space Division Multiplexing Techniques)
Open AccessArticle
Simulation of a Pulsed Metastable Helium Lidar
by
Jiaxin Lan, Yuli Han, Ruocan Zhao, Tingdi Chen, Xianghui Xue, Dongsong Sun, Hang Zhou, Zhenwei Liu and Yingyu Liu
Photonics 2024, 11(5), 465; https://doi.org/10.3390/photonics11050465 - 15 May 2024
Abstract
►▼
Show Figures
Measurements of atmosphere density in the upper thermosphere and exosphere are of great significance for studying space–atmosphere interactions. However, the region from 200 km to 1000 km has been a blind area for traditional ground-based active remote sensing techniques due to the limitation
[...] Read more.
Measurements of atmosphere density in the upper thermosphere and exosphere are of great significance for studying space–atmosphere interactions. However, the region from 200 km to 1000 km has been a blind area for traditional ground-based active remote sensing techniques due to the limitation of facilities and the paucity of neutral atmosphere. To fulfill this gap, the University of Science and Technology of China is developing a powerful metastable helium resonance fluorescent lidar incorporating a 2 m aperture telescope, a high-energy 1083 nm pulsed laser, as well as a superconducting nanowire single-photon detector (SNSPD) with high quantum efficiency and low dark noise. The system is described in detail in this work. To evaluate the performance of the lidar system, numerical simulation is implemented. The results show that metastable helium density measurements can be achieved with a relative error of less than 20% above 370 km in winter and less than 200% in 270–460 km in summer, demonstrating the feasibility of metastable helium lidar.
Full article
Figure 1
Open AccessArticle
The Generation of Circularly Polarized Isolated Attosecond Pulses with Tunable Helicity from CO Molecules in Polarization Gating Laser Fields
by
Shiju Chen, Hua Yuan, Feng Wang, Jiahang Song, Yue Zhao, Chunhui Yang, Tianxin Ou, Ru Zhang, Qiang Chang and Yuping Sun
Photonics 2024, 11(5), 464; https://doi.org/10.3390/photonics11050464 - 15 May 2024
Abstract
We theoretically demonstrate a scheme to generate circularly polarized (CP) isolated attosecond pulses (IAPs) with tunable helicity using a polarization gating laser field interacting with the CO molecule. The results show that a broadband CP supercontinuum is produced from the oriented CO molecule,
[...] Read more.
We theoretically demonstrate a scheme to generate circularly polarized (CP) isolated attosecond pulses (IAPs) with tunable helicity using a polarization gating laser field interacting with the CO molecule. The results show that a broadband CP supercontinuum is produced from the oriented CO molecule, which supports the generation of an IAP with an ellipticity of 0.98 and a duration of 90 as. Furthermore, the helicity of the generated harmonics and IAP can be effectively controlled by modulating the laser field and the orientation angle of the CO molecule. Our method will advance research on chiral-specific dynamics and magnetic circular dichroism on the attosecond timescale.
Full article
(This article belongs to the Topic Recent Advances in Nonlinear Optics and Nonlinear Optical Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Generation of Propagation-Dependent OAM Self-Torque with Chirped Spiral Gratings
by
Ruediger Grunwald, Mathias Jurke, Max Liebmann, Alexander Treffer and Martin Bock
Photonics 2024, 11(5), 463; https://doi.org/10.3390/photonics11050463 - 15 May 2024
Abstract
The application of non-uniform spiral gratings to control the structure, topological parameters and propagation of orbital angular momentum (OAM) beams was studied experimentally with coherent near-infrared light. Adapted digital spiral grating structures were programmed into the phase map of a high-resolution liquid-crystal-on-silicon spatial
[...] Read more.
The application of non-uniform spiral gratings to control the structure, topological parameters and propagation of orbital angular momentum (OAM) beams was studied experimentally with coherent near-infrared light. Adapted digital spiral grating structures were programmed into the phase map of a high-resolution liquid-crystal-on-silicon spatial light modulator (LCoS-SLM). It is shown that characteristic spatio-spectral anomalies related to Gouy phase shift can be used as pointers to quantify rotational beam properties. Depending on the sign and gradient of spatially variable periods of chirped spiral gratings (CSGs), variations in rotation angle and angular velocity were measured as a function of the propagation distance. Propagation-dependent self-torque is introduced in analogy to known local self-torque phenomena of OAM beams as obtained by the superposition of temporally chirped or phase-modulated wavepackets. Applications in metrology, nonlinear optics or particle trapping are conceivable.
Full article
(This article belongs to the Special Issue Structured Light Beams: Science and Applications)
Open AccessArticle
Characterizing Extreme Events in a Fabry–Perot Laser with Optical Feedback
by
Shanshan Ge, Yu Huang, Kun Li, Pei Zhou, Penghua Mu, Xin Zhu and Nianqiang Li
Photonics 2024, 11(5), 462; https://doi.org/10.3390/photonics11050462 - 15 May 2024
Abstract
The study of extreme events (EEs) in photonics has expanded significantly due to straightforward implementation conditions. EEs have not been discussed systematically, to the best of our knowledge, in the chaotic dynamics of a Fabry–Perot laser with optical feedback, so we address this
[...] Read more.
The study of extreme events (EEs) in photonics has expanded significantly due to straightforward implementation conditions. EEs have not been discussed systematically, to the best of our knowledge, in the chaotic dynamics of a Fabry–Perot laser with optical feedback, so we address this in the current contribution. Herein, we not only find EEs in all modes but also divide the EEs in total output into two categories for further discussion. The two types of EEs have similar statistical features to conventional rogue waves. The occurrence probability of EEs undergoes a saturation effect as the feedback strength increases. Additionally, we analyze the influence of feedback strength, feedback delay, and pump current on the probability of EEs defined by two criteria of EEs and find similar trends. We hope that this work contributes to a deep understanding and serves as inspiration for further research into various multimode semiconductor laser systems.
Full article
(This article belongs to the Special Issue Advanced Lasers and Their Applications II)
►▼
Show Figures
Figure 1
Open AccessArticle
Integrated Analysis of Line-Of-Sight Stability of Off-Axis Three-Mirror Optical System
by
Yatao Lu, Bin Sun, Gui Mei, Qinglei Zhao, Zhongshan Wang, Yang Gao and Shuxin Wang
Photonics 2024, 11(5), 461; https://doi.org/10.3390/photonics11050461 - 15 May 2024
Abstract
As a space camera works in orbit, the stress rebound caused by gravity inevitably results in the deformation of its optomechanical structure, and the relative position change between different optical components will affect the Line-Of-Sight pointing of the camera. In this paper, the
[...] Read more.
As a space camera works in orbit, the stress rebound caused by gravity inevitably results in the deformation of its optomechanical structure, and the relative position change between different optical components will affect the Line-Of-Sight pointing of the camera. In this paper, the optical sensitivity calculation of a space camera’s Line-Of-Sight pointing is realized based on the optomechanical constraint equations, and the Line-Of-Sight equations are constructed using the second type of response (DRESP2) method to realize an optomechanical integrated analysis of the camera’s Line-Of-Sight stability at the structural finite element solver level. The verification results show that the Line-Of-Sight stability error is 6.38%, meaning that this method can identify the sensitive optical elements of the optical system efficiently and quickly. Thus, the method in this paper has important significance as a reference for the analysis of the Line-Of-Sight stability of complex optical systems.
Full article
(This article belongs to the Special Issue Recent Industrial Approaches of Optical Metasurfaces: Applications and Trends)
►▼
Show Figures
Figure 1
Open AccessReview
Features of Adaptive Phase Correction of Optical Wave Distortions under Conditions of Intensity Fluctuations
by
Vladimir Lukin
Photonics 2024, 11(5), 460; https://doi.org/10.3390/photonics11050460 - 14 May 2024
Abstract
An analysis of the features of measurements and correction of phase distortions in optical waves propagating in the atmosphere at various levels of turbulence was performed. It is shown that with increasing intensity fluctuations, the limiting capabilities of phase correction decrease, and the
[...] Read more.
An analysis of the features of measurements and correction of phase distortions in optical waves propagating in the atmosphere at various levels of turbulence was performed. It is shown that with increasing intensity fluctuations, the limiting capabilities of phase correction decrease, and the phase of an optical wave that has passed through a turbulence layer consists of two components: potential and vortex. It was found that even in the region of weak fluctuations there is an overlap of spectral filtering functions for intensity and phase fluctuations. Areas of turbulence inhomogeneities have been identified that will have mutual influence and negatively affect the operation of the phase meter. It is noted that correlation functions, both phase and intensity, are less susceptible to this compared to structural functions. The results of experimental studies on the reconstruction of the wavefront of laser radiation distorted by atmospheric turbulence using a Shack–Hartmann wavefront sensor during vignetting and central screening of the entrance pupil in the optical system are presented. Studies have been carried out on the propagation of laser radiation along a horizontal atmospheric path for various levels of turbulence. The results are analyzed in terms of Zernike polynomials.
Full article
(This article belongs to the Special Issue Advances in Structured Light Generation and Manipulation)
►▼
Show Figures
Figure 1
Open AccessArticle
Influence of the Experimental Setup on Electromagnetic Pulses in the VHF Band at Relativistic High-Power Laser Facilities
by
Michael Ehret, Luca Volpe, Jon Imanol Apiñaniz, Maria Dolores Rodríguez-Frías and Giancarlo Gatti
Photonics 2024, 11(5), 459; https://doi.org/10.3390/photonics11050459 - 14 May 2024
Abstract
We present experimental results for the controlled mitigation of the electromagnetic pulses (EMPs) produced in the interactions of a 1 PW high-power 30 fs Ti:Sa laser VEGA-3 with solid-density targets transparent to laser-forward-accelerated relativistic electrons. This study aims at the band of very
[...] Read more.
We present experimental results for the controlled mitigation of the electromagnetic pulses (EMPs) produced in the interactions of a 1 PW high-power 30 fs Ti:Sa laser VEGA-3 with solid-density targets transparent to laser-forward-accelerated relativistic electrons. This study aims at the band of very high frequencies (VHFs), i.e., those in the hundreds of MHz, which comprise the fundamental cavity modes of the rectangular VEGA-3 vacuum chamber. We demonstrate mode suppression by a tailoring of the laser-produced space charge distribution.
Full article
(This article belongs to the Special Issue Metrology at High-Power Laser Facilities: Primary and Secondary Laser-Driven Sources)
►▼
Show Figures
Figure 1
Open AccessArticle
A 3D Reconstruction Method Based on Homogeneous De Bruijn-Encoded Structured Light
by
Weimin Li and Songlin Li
Photonics 2024, 11(5), 458; https://doi.org/10.3390/photonics11050458 - 14 May 2024
Abstract
Structured light three-dimensional reconstruction is one of the important methods for non-contact acquisition of sparse texture object surfaces. Variations in ambient illumination and disparities in object surface reflectance can significantly impact the fidelity of three-dimensional reconstruction, introducing considerable inaccuracies. We introduce a robust
[...] Read more.
Structured light three-dimensional reconstruction is one of the important methods for non-contact acquisition of sparse texture object surfaces. Variations in ambient illumination and disparities in object surface reflectance can significantly impact the fidelity of three-dimensional reconstruction, introducing considerable inaccuracies. We introduce a robust method for color speckle structured light encoding, which is based on a variant of the De Bruijn sequence, termed the Homogeneous De Bruijn Sequence. This innovative approach enhances the reliability and accuracy of structured light techniques for three-dimensional reconstruction by utilizing the distinctive characteristics of Homogeneous De Bruijn Sequences. Through a pruning process applied to the De Bruijn sequence, a structured light pattern with seven distinct color patches is generated. This approach ensures a more equitable distribution of speckle information.
Full article
(This article belongs to the Section Optical Interaction Science)
►▼
Show Figures
Figure 1
Open AccessArticle
Mode Heterogeneous Multimode Power Splitter Based on Cascaded Mode-Dependent Splitters and Converters
by
Xin Xu, Hongliang Chen, Xin Fu and Lin Yang
Photonics 2024, 11(5), 457; https://doi.org/10.3390/photonics11050457 - 14 May 2024
Abstract
To the best of our knowledge, a novel concept of mode heterogeneity for the design of multimode devices is presented in this paper and applied to the design of scalable multimode power splitters. Based on a cascade of mode-dependent splitters and converters, we
[...] Read more.
To the best of our knowledge, a novel concept of mode heterogeneity for the design of multimode devices is presented in this paper and applied to the design of scalable multimode power splitters. Based on a cascade of mode-dependent splitters and converters, we achieve beam splitting and mode conversion for four modes from to in the bandwidth from 1525 nm to 1560 nm. The measurements of the device at 1550 nm show excellent performance, with the insertion loss ranging from 0.16 dB to 0.63 dB, crosstalk all below −16.71 dB, and power uniformity between 0.026 dB and 0.168 dB.
Full article
(This article belongs to the Special Issue Optical Communication, Sensing and Network)
►▼
Show Figures
Figure 1
Open AccessArticle
Exploring the Origin of Lissajous Geometric Modes from the Ray Tracing Model
by
Xin-Liang Zheng, Yu-Han Fang, Wei-Che Chung, Cheng-Li Hsieh and Yung-Fu Chen
Photonics 2024, 11(5), 456; https://doi.org/10.3390/photonics11050456 - 13 May 2024
Abstract
In this paper, we use the geometric optics and discuss the path of laser beam in a simple laser (concave-plano) cavity with the birefringence crystal. In specific lengths of the laser cavity, we can observe various types of Lissajous-like structural laser modes that
[...] Read more.
In this paper, we use the geometric optics and discuss the path of laser beam in a simple laser (concave-plano) cavity with the birefringence crystal. In specific lengths of the laser cavity, we can observe various types of Lissajous-like structural laser modes that can be simulated using our ray tracing model. At the end of this paper, we provide an adjusted ABCD matrix. With the adjusted ABCD matrix and iterative calculation, we can obtain the 3D trajectories which are similar to the experimental results. These structural laser modes can be realized by a solid-state laser with off-axis pumping. From the comparison between the experimental data and the numerical data, we clarify the relationship between the 3D Lissajous-like structural laser modes and ray trajectory in the laser cavity.
Full article
(This article belongs to the Special Issue Emerging Topics in Structured Light)
►▼
Show Figures
Figure 1
Open AccessArticle
Analytical Model of Point Spread Function under Defocused Degradation in Diffraction-Limited Systems: Confluent Hypergeometric Function
by
Feijun Song, Qiao Chen, Xiongxin Tang and Fanjiang Xu
Photonics 2024, 11(5), 455; https://doi.org/10.3390/photonics11050455 - 13 May 2024
Abstract
In recent years, optical systems near the diffraction limit have been widely used in high-end applications. Evidently, an analytical solution of the point spread function (PSF) will help to enhance both understanding and dealing with the imaging process. This paper analyzes the Fresnel
[...] Read more.
In recent years, optical systems near the diffraction limit have been widely used in high-end applications. Evidently, an analytical solution of the point spread function (PSF) will help to enhance both understanding and dealing with the imaging process. This paper analyzes the Fresnel diffraction of diffraction-limited optical systems in defocused conditions. For this work, an analytical solution of the defocused PSF was obtained using the series expansion of the confluent hypergeometric functions. The analytical expression of the defocused optical transfer function is also presented herein for comparison with the PSF. Additionally, some characteristic parameters for the PSF are provided, such as the equivalent bandwidth and the Strehl ratio. Comparing the PSF obtained using the fast Fourier transform algorithm of an optical system with known, detailed parameters to the analytical solution derived in this paper using only the typical parameters, the root mean square errors of the two methods were found to be less than 3% in the weak and medium defocus range. The attractive advantages of the universal model, which is independent of design details, objective types, and applications, are discussed.
Full article
(This article belongs to the Special Issue Emerging Topics in High-Power Laser and Light–Matter Interactions)
►▼
Show Figures
Figure 1
Open AccessArticle
Dual-Polarization Conversion and Coding Metasurface for Wideband Radar Cross-Section Reduction
by
Saima Hafeez, Jianguo Yu, Fahim Aziz Umrani, Yibo Huang, Wang Yun and Muhammad Ishfaq
Photonics 2024, 11(5), 454; https://doi.org/10.3390/photonics11050454 - 11 May 2024
Abstract
Modern stealth application systems require integrated meta-devices to operate effectively and have gained significant attention recently. This research paper proposes a 1-bit coding metasurface (CM) design. The fundamental component of the proposed CM is integrated to convert linearly polarized incoming electromagnetic waves into
[...] Read more.
Modern stealth application systems require integrated meta-devices to operate effectively and have gained significant attention recently. This research paper proposes a 1-bit coding metasurface (CM) design. The fundamental component of the proposed CM is integrated to convert linearly polarized incoming electromagnetic waves into their orthogonal counterpart within frequency bands of 12.37–13.03 GHz and 18.96–32.37 GHz, achieving a polarization conversion ratio exceeding 99%. Furthermore, it enables linear-to-circular polarization conversion from 11.80 to 12.29, 13.17 to 18.44, and 33.33 to 40.35 GHz. A second element is produced by rotating a fundamental component by 90°, introducing a phase difference of π (pi) between them. Both elements are arranged in an array using a random aperiodic coding sequence to create a 1-bit CM for reducing the radar cross-section (RCS). The planar structure achieved over 10 dB RCS reduction for polarized waves in the frequency bands of 13.1–13.8 GHz and 20.4–30.9 GHz. A prototype was fabricated and tested, with the experimental results showing a good agreement with the simulated outcomes. The proposed design holds potential applications in radar systems, reflector antennas, stealth technologies, and satellite communication.
Full article
(This article belongs to the Special Issue Advanced Photonics Metamaterials and Metasurfaces: Science and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Ghost Fringe Suppression by Modifying the f-Number of the Diverger Lens for the Interferometric Measurement of Catadioptric Telescopes
by
Yi-Kai Huang and Cheng-Huan Chen
Photonics 2024, 11(5), 453; https://doi.org/10.3390/photonics11050453 - 11 May 2024
Abstract
A high-precision catadioptric telescope such as a space-borne telescope is usually tested with interferometer to check the optical quality in assembly. The coarse and fine alignment of the telescope are mainly based on the information from the coordinate measuring machine and the fringe
[...] Read more.
A high-precision catadioptric telescope such as a space-borne telescope is usually tested with interferometer to check the optical quality in assembly. The coarse and fine alignment of the telescope are mainly based on the information from the coordinate measuring machine and the fringe pattern of the interferometer, respectively. In addition, further fine-tuning can be achieved according to the variation in wavefront error and Zernike data. The issue is that the vast majority of the catadioptric telescopes contain plural lens surfaces which could produce unwanted ghost fringes, disturbing the wavefront measurement. Technically, off-axis installation to shift away ghost fringes from central interferogram could be acceptable in some cases. Nevertheless, in this paper, the source of ghost fringe in interferometric measurement for catadioptric telescopes is investigated with light path simulation, and a solution of reducing the f-number of the diverger lens is proposed to eliminate the ghost fringe disturbance. Both simulation and experimental results verify the effectiveness of the proposed concept.
Full article
(This article belongs to the Special Issue Optical Systems for Astronomy)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Photonics Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Materials, Nanomaterials, Photonics, Polymers, Applied Sciences, Sensors
Optical and Optoelectronic Properties of Materials and Their Applications
Topic Editors: Zhiping Luo, Gibin George, Navadeep ShrivastavaDeadline: 20 May 2024
Topic in
Applied Sciences, JMMP, Materials, Photonics, Plasma
Hybrid and Heterogeneous Integration on Photonic Circuits
Topic Editors: Joan Manel Ramírez, Carlos Alberto Alonso-RamosDeadline: 31 May 2024
Topic in
Applied Sciences, Electronics, Photonics, Remote Sensing, Technologies
Emerging Terahertz Technologies for Integrated Sensing and Communication
Topic Editors: Jianjun Ma, Xiue Bao, Bin Li, Suman MukherjeeDeadline: 31 July 2024
Topic in
Applied Sciences, Electronics, Optics, Photonics, Technologies
The Extended Technological Platform Based on Optics and Microwaves: Conventional and Hybrid Solutions
Topic Editors: Francesco Prudenzano, Antonella D’Orazio, Maurizio FerrariDeadline: 30 September 2024
Conferences
Special Issues
Special Issue in
Photonics
Advances in Infrared Spectroscopy and Raman Spectroscopy
Guest Editors: Zehua Han, Yujie ShenDeadline: 20 May 2024
Special Issue in
Photonics
Optical Technologies Supporting 5G/6G Mobile Networks
Guest Editors: Zbigniew Zakrzewski, Mariusz Głąbowski, Piotr Zwierzykowski, Vincenzo Eramo, Francesco Giacinto LavaccaDeadline: 31 May 2024
Special Issue in
Photonics
Micro-Nano Optical Devices
Guest Editors: Yan Shen, Yanfeng ZhangDeadline: 15 June 2024
Special Issue in
Photonics
Editorial Board Members’ Collection Series: Photonics Sensors
Guest Editors: Carlos Marques, Flavio EspositoDeadline: 30 June 2024