Journal Description
Gels
Gels
is an international, peer-reviewed, open access journal on physical and chemical gels published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q1 (Polymer Science)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 11.1 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about the Gels.
Impact Factor:
4.6 (2022);
5-Year Impact Factor:
5.2 (2022)
Latest Articles
Sequential Fabrication of a Three-Layer Retina-Like Structure
Gels 2024, 10(5), 336; https://doi.org/10.3390/gels10050336 - 15 May 2024
Abstract
Tissue engineering is considered a promising approach to treating advanced degenerative maculopathies such as nonexudative age-related macular degeneration (AMD), the leading cause of blindness worldwide. The retina consists of several hierarchical tissue layers, each of which is supported by a layer underneath. Each
[...] Read more.
Tissue engineering is considered a promising approach to treating advanced degenerative maculopathies such as nonexudative age-related macular degeneration (AMD), the leading cause of blindness worldwide. The retina consists of several hierarchical tissue layers, each of which is supported by a layer underneath. Each of these layers has a different morphology and requires distinct conditions for proper assembly. In fact, a prerequisite step for the assembly of each of these layers is the organization of the layer underneath. Advanced retinal degeneration includes degeneration of the other retina layers, including the choroid, the retinal pigmented epithelium (RPE), and the photoreceptors. Here, we report a step-by-step fabrication process of a three-layer retina-like structure. The process included the 3D printing of a choroid-like structure in an extracellular matrix (ECM) hydrogel, followed by deposition of the RPE monolayer. After the formation of the blood vessel–RPE interface, the photoreceptor cells were deposited to interact with the RPE layer. At the end of the fabrication process, each layer was characterized for its morphology and expression of specific markers, and the integration of the three-layer retina was evaluated. We envision that such a retina-like structure may be able to attenuate the deterioration of a degenerated retina and improve engraftment and regeneration. This retinal implant may potentially be suitable for a spectrum of macular degenerative diseases for which there are currently no cures and may save millions from complete blindness.
Full article
(This article belongs to the Special Issue Advances in Chemistry and Physics of Hydrogels)
Open AccessArticle
Preparation and Application of High Internal Phase Pickering Emulsion Gels Stabilized by Starch Nanocrystal/Tannic Acid Complex Particles
by
Haoran Jin, Chen Li, Yajuan Sun, Bingtian Zhao and Yunxing Li
Gels 2024, 10(5), 335; https://doi.org/10.3390/gels10050335 - 15 May 2024
Abstract
Herein, the starch nanocrystal/tannic acid (ST) complex particles, which were prepared based on the hydrogen bond between starch nanocrystal (SNC) and tannic acid (TA), were successfully used to stabilize the HIPPE gels. The optimal TA concentration of the ST complex particles resulted in
[...] Read more.
Herein, the starch nanocrystal/tannic acid (ST) complex particles, which were prepared based on the hydrogen bond between starch nanocrystal (SNC) and tannic acid (TA), were successfully used to stabilize the HIPPE gels. The optimal TA concentration of the ST complex particles resulted in better water dispersibility, surface wettability, and interfacial activity as compared to SNC. The hydrogen bond responsible for the formation of ST complex particles and subsequent stable emulsions was demonstrated by varying the pH and ionic strength of the aqueous phase. Notably, the HIPPE gels stabilized via the ST complex particles can maintain long-term stability for up to three months. The HIPPEs stabilized via the ST complex particles all displayed gel-like features and had smaller droplets and denser droplet networks than the SNC-stabilized HIPPEs. The rheological behavior of HIPPE gels stabilized via the ST complex particles can be readily changed by tuning the mass ratio of SNC and TA as well as pH. Finally, the prepared HIPPE gels used to effectively protect encapsulated β-carotene against high temperatures and ultraviolet radiation and its controllable release at room temperature were demonstrated. It is anticipated that the aforementioned findings will provide new perspectives on the preparation of Pickering emulsion for delivery systems.
Full article
(This article belongs to the Special Issue Gel-Related Papers from the 9th Asian Conference on Colloid and Interface Science 2023 (ACCIS 2023))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Xyloglucan–Cellulose Nanocrystals Mixtures: A Case Study of Nanocolloidal Hydrogels and Levers for Tuning Functional Properties
by
Géraldine Rangel, Céline Moreau, Ana Villares, Christophe Chassenieux and Bernard Cathala
Gels 2024, 10(5), 334; https://doi.org/10.3390/gels10050334 - 15 May 2024
Abstract
The development of fully biobased hydrogels obtained by simple routes and in the absence of toxic or environmentally harmful reagents is a major challenge in meeting new societal demands. In this work, we discuss the development of hydrogels made from cellulose nanocrystals (CNCs)
[...] Read more.
The development of fully biobased hydrogels obtained by simple routes and in the absence of toxic or environmentally harmful reagents is a major challenge in meeting new societal demands. In this work, we discuss the development of hydrogels made from cellulose nanocrystals (CNCs) and xyloglucan (XG), two non-toxic, renewable, and biobased components. We present three strategies to fine-tune the functional properties. The first one consists in varying the XG/CNC ratio that leads to the modulation of the mechanical properties of hydrogels as well as a better comprehension of the gel mechanism formation. The second relies on tuning the XG chains’ interaction by enzymatic modification to achieve thermoresponsive systems. Finally, the third one is based on the increase in the hydrogel solid content by osmotic concentration. The high-solid-content gels were found to have very high mechanical properties and self-healing properties that can be used for molding materials. Overall, these approaches are a case study of potential modifications and properties offered by biobased nanocolloidal hydrogels.
Full article
(This article belongs to the Special Issue Cellulose-Based Gels: Synthesis, Properties, and Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
The MnO2/GelMA Composite Hydrogels Improve the ROS Microenvironment of Annulus Fibrosus Cells by Promoting the Antioxidant and Autophagy through the SIRT1/NRF2 Pathway
by
Bohan Xu, Mingxuan Huang, Jiaying Li, Qingchen Meng, Jie Hu, Qianglong Chen, Hui He, Hao Jiang, Fengxuan Han, Bin Meng and Ting Liang
Gels 2024, 10(5), 333; https://doi.org/10.3390/gels10050333 - 15 May 2024
Abstract
Intervertebral disc degeneration (IVDD) is a worldwide disease that causes low back pain and reduces quality of life. Biotherapeutic strategies based on tissue engineering alternatives, such as intervertebral disc scaffolds, supplemented by drug-targeted therapy have brought new hope for IVDD. In this study,
[...] Read more.
Intervertebral disc degeneration (IVDD) is a worldwide disease that causes low back pain and reduces quality of life. Biotherapeutic strategies based on tissue engineering alternatives, such as intervertebral disc scaffolds, supplemented by drug-targeted therapy have brought new hope for IVDD. In this study, to explore the role and mechanism of MnO2/GelMA composite hydrogels in alleviating IVDD, we prepared composite hydrogels with MnO2 and methacrylate gelatin (GelMA) and characterized them using compression testing and transmission electron microscopy (TEM). Annulus fibrosus cells (AFCs) were cultured in the composite hydrogels to verify biocompatibility by live/dead and cytoskeleton staining. Cell viability assays and a reactive oxygen species (ROS) probe were used to analyze the protective effect of the composite hydrogels under oxidative damage. To explore the mechanism of improving the microenvironment, we detected the expression levels of antioxidant and autophagy-related genes and proteins by qPCR and Western blotting. We found that the MnO2/GelMA composite hydrogels exhibited excellent biocompatibility and a porous structure, which promoted cell proliferation. The addition of MnO2 nanoparticles to GelMA cleared ROS in AFCs and induced the expression of antioxidant and cellular autophagy through the common SIRT1/NRF2 pathway. Therefore, the MnO2/GelMA composite hydrogels, which can improve the disc microenvironment through scavenging intracellular ROS and resisting oxidative damage, have great application prospects in the treatment of IVDD.
Full article
(This article belongs to the Special Issue Hydrogels for Therapeutic Delivery: Current Developments and Future Directions)
►▼
Show Figures
Figure 1
Open AccessArticle
Fluoride-Ion-Responsive Sol–Gel Transition in an L-Cysteine/AgNO3 System: Self-Assembly Peculiarities and Anticancer Activity
by
Dmitry V. Vishnevetskii, Yana V. Andrianova, Elizaveta E. Polyakova, Alexandra I. Ivanova and Arif R. Mekhtiev
Gels 2024, 10(5), 332; https://doi.org/10.3390/gels10050332 - 14 May 2024
Abstract
Supramolecular hydrogels based on low-molecular-weight compounds are a unique class of so-called “soft” materials, formed by weak non-covalent interactions between precursors at their millimolar concentrations. Due to the variety of structures that can be formed using different low-molecular-weight gelators, they are widely used
[...] Read more.
Supramolecular hydrogels based on low-molecular-weight compounds are a unique class of so-called “soft” materials, formed by weak non-covalent interactions between precursors at their millimolar concentrations. Due to the variety of structures that can be formed using different low-molecular-weight gelators, they are widely used in various fields of technology and medicine. In this study, we report for the first time an unusual self-assembly process of mixing a hydrosol obtained from L-cysteine and silver nitrate (cysteine–silver sol—CSS) with sodium halides. Modern instrumental techniques such as viscosimetry, UV spectroscopy, dynamic light scattering, zeta potential measurements, SEM and EDS identified that adding fluoride anions to CSS is able to form stable hydrogels of a thixotropic nature, while Cl−, Br− and I− lead to precipitation. The self-assembly process proceeds using a narrow concentration range of F−. An increase in the fluoride anion content in the system leads to a change in the gel network morphology from elongated structures to spherical ones. This fact is reflected in a decrease in the gel viscosity and a number of gel–sol–gel transition cycles. The mechanism of F−’s interaction with hydrosol includes the condensation of anions on the positive surface of the CSS nanoparticles, their binding via electrostatic forces and the formation of a resulting gel carcass. In vitro analysis showed that the hydrogels suppressed human squamous carcinoma cells at a micromolar sample concentration. The obtained soft gels could have potential applications against cutaneous malignancy and as carriers for fluoride anion and other bioactive substance delivery.
Full article
(This article belongs to the Special Issue Synthesis and Applications of Hydrogels (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessReview
Dynamic Hydrogels against Infections: From Design to Applications
by
Ming Zhang and Chongyu Zhu
Gels 2024, 10(5), 331; https://doi.org/10.3390/gels10050331 - 14 May 2024
Abstract
Human defense against infection remains a global topic. In addition to developing novel anti-infection drugs, therapeutic drug delivery strategies are also crucial to achieving a higher efficacy and lower toxicity of these drugs for treatment. The application of hydrogels has been proven to
[...] Read more.
Human defense against infection remains a global topic. In addition to developing novel anti-infection drugs, therapeutic drug delivery strategies are also crucial to achieving a higher efficacy and lower toxicity of these drugs for treatment. The application of hydrogels has been proven to be an effective localized drug delivery approach to treating infections without generating significant systemic adverse effects. The recent emerging dynamic hydrogels further show power as injectable formulations, giving new tools for clinical treatments. In this review, we delve into the potential applications of dynamic hydrogels in antibacterial and antiviral treatments and elaborate on their molecular designs and practical implementations. By outlining the chemical designs underlying these hydrogels, we discuss how the choice of dynamic chemical bonds affects their stimulus responsiveness, self-healing capabilities, and mechanical properties. Afterwards, we focus on how to endow dynamic hydrogels with anti-infection properties. By comparing different drug-loading methods, we highlight the advantages of dynamic chemical bonds in achieving sustained and controlled drug release. Moreover, we also include the design principles and uses of hydrogels that possess inherent anti-infective properties. Furthermore, we explore the design principles and applications of hydrogels with inherent anti-infective properties. Finally, we briefly summarize the current challenges faced by dynamic hydrogels and present a forward-looking vision for their future development. Through this review, we expect to draw more attention to these therapeutic strategies among scientists working with chemistry, materials, as well as pharmaceutics.
Full article
(This article belongs to the Special Issue State-of-the-Art Gel Research in China)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Sulfated Hydrogels as Primary Intervertebral Disc Cell Culture Systems
by
Paola Bermudez-Lekerika, Katherine B. Crump, Karin Wuertz-Kozak, Christine L. Le Maitre and Benjamin Gantenbein
Gels 2024, 10(5), 330; https://doi.org/10.3390/gels10050330 - 14 May 2024
Abstract
The negatively charged extracellular matrix plays a vital role in intervertebral disc tissues, providing specific cues for cell maintenance and tissue hydration. Unfortunately, suitable biomimetics for intervertebral disc regeneration are lacking. Here, sulfated alginate was investigated as a 3D culture material due to
[...] Read more.
The negatively charged extracellular matrix plays a vital role in intervertebral disc tissues, providing specific cues for cell maintenance and tissue hydration. Unfortunately, suitable biomimetics for intervertebral disc regeneration are lacking. Here, sulfated alginate was investigated as a 3D culture material due to its similarity to the charged matrix of the intervertebral disc. Precursor solutions of standard alginate, or alginate with 0.1% or 0.2% degrees of sulfation, were mixed with primary human nucleus pulposus cells, cast, and cultured for 14 days. A 0.2% degree of sulfation resulted in significantly decreased cell density and viability after 7 days of culture. Furthermore, a sulfation-dependent decrease in DNA content and metabolic activity was evident after 14 days. Interestingly, no significant differences in cell density and viability were observed between surface and core regions for sulfated alginate, unlike in standard alginate, where the cell number was significantly higher in the core than in the surface region. Due to low cell numbers, phenotypic evaluation was not achieved in sulfated alginate biomaterial. Overall, standard alginate supported human NP cell growth and viability superior to sulfated alginate; however, future research on phenotypic properties is required to decipher the biological properties of sulfated alginate in intervertebral disc cells.
Full article
(This article belongs to the Special Issue Hydrogels for the Regeneration of Joints of the Musculoskeletal System in Orthopedics)
►▼
Show Figures
Figure 1
Open AccessArticle
Development of Improved Confined Compression Testing Setups for Use in Stress Relaxation Testing of Viscoelastic Biomaterials
by
Anthony El Kommos, Alicia R. Jackson, Fotios Andreopoulos and Francesco Travascio
Gels 2024, 10(5), 329; https://doi.org/10.3390/gels10050329 - 13 May 2024
Abstract
The development of cell-based biomaterial alternatives holds significant promise in tissue engineering applications, but it requires accurate mechanical assessment. Herein, we present the development of a novel 3D-printed confined compression apparatus, fabricated using clear resin, designed to cater to the unique demands of
[...] Read more.
The development of cell-based biomaterial alternatives holds significant promise in tissue engineering applications, but it requires accurate mechanical assessment. Herein, we present the development of a novel 3D-printed confined compression apparatus, fabricated using clear resin, designed to cater to the unique demands of biomaterial developers. Our objective was to enhance the precision of force measurements and improve sample visibility during compression testing. We compared the performance of our innovative 3D-printed confined compression setup to a conventional setup by performing stress relaxation testing on hydrogels with variable degrees of crosslinking. We assessed equilibrium force, aggregate modulus, and peak force. This study demonstrates that our revised setup can capture a larger range of force values while simultaneously improving accuracy. We were able to detect significant differences in force and aggregate modulus measurements of hydrogels with variable degrees of crosslinking using our revised setup, whereas these were indistinguishable with the convectional apparatus. Further, by incorporating a clear resin in the fabrication of the compression chamber, we improved sample visibility, thus enabling real-time monitoring and informed assessment of biomaterial behavior under compressive testing.
Full article
(This article belongs to the Special Issue Hydrogels for the Regeneration of Joints of the Musculoskeletal System in Orthopedics)
►▼
Show Figures
Figure 1
Open AccessArticle
Study of the Synthesis of Multi-Cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Co-Ni-O Aerogels and Their Catalytic Activity in the Dry Reforming of Methane
by
Jaroslav Cihlar, Serhii Tkachenko, Vendula Bednarikova, Jaroslav Cihlar, Jr., Klara Castkova, Martin Trunec and Ladislav Celko
Gels 2024, 10(5), 328; https://doi.org/10.3390/gels10050328 - 11 May 2024
Abstract
Dense multi-cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Ni-Co-O oxide aerogels were prepared by epoxide-driven sol–gel synthesis. Catalysts for dry reformation of methane, Sm2O3/Co, Sm2O3/Ni, Al2O3/Co, Al2O3/Ni, Al
[...] Read more.
Dense multi-cationic Sm-Co-O, Sm-Ni-O, Al-Co-O, Al-Ni-O, and Al-Ni-Co-O oxide aerogels were prepared by epoxide-driven sol–gel synthesis. Catalysts for dry reformation of methane, Sm2O3/Co, Sm2O3/Ni, Al2O3/Co, Al2O3/Ni, Al2O3/Co, and Ni were prepared by reduction of aerogels with hydrogen and their catalytic activities and C-deposition during dry reformation of methane were tested. Catalytic tests showed high methane conversion (93–98%) and C-deposition (0.01–4.35 mg C/gcat.h). The highest content of C-deposits after catalytic tests was determined for Al2O3/Co and Al2O3/Ni catalysts, which was related to the formation of Al alloys with Co and Ni. A uniform distribution of Co0 and Ni0 nanoparticles (in the form of a CoNi alloy) was found only for the Al2O3/Co and Ni catalysts, which showed the highest activity as well as low C deposition.
Full article
(This article belongs to the Special Issue Chemical Properties and Application of Gel Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Ceramic Fiber-Reinforced Polyimide Aerogel Composites with Improved Shape Stability against Shrinkage
by
Wanlin Shi, Mengmeng Wan, Yating Tang and Weiwang Chen
Gels 2024, 10(5), 327; https://doi.org/10.3390/gels10050327 - 10 May 2024
Abstract
Polyimide (PI) aerogels, renowned for their nano-porous structure and exceptional performance across a spectrum of applications, often encounter significant challenges during fabrication, primarily due to severe shrinkage. In this study, we innovatively incorporated ceramic fibers of varying diameters into the PI aerogel matrix
[...] Read more.
Polyimide (PI) aerogels, renowned for their nano-porous structure and exceptional performance across a spectrum of applications, often encounter significant challenges during fabrication, primarily due to severe shrinkage. In this study, we innovatively incorporated ceramic fibers of varying diameters into the PI aerogel matrix to enhance the shape stability against shrinkage. The
structure of the resulting ceramic fiber-reinforced PI (CF-PI) aerogel composites as well as their performance in thermal decomposition, thermal insulation, and compression resistance were characterized. The results revealed that the CF-PI aerogel composites dried by supercritical ethanol achieved greatly reduced shrinkage as low as 5.0 vol.% and low thermal conductivity ranging from 31.2 mW·m−1·K−1 to 35.3 mW·m−1·K−1, showcasing their excellent performance in shape stability and thermal insulation. These composites also inherited the superior residue-forming ability of ceramic fibers and the robust mechanical attributes of PI, thereby exhibiting enhanced thermal stability and compression resistance. Besides, the effects of different drying conditions on the structure and properties of CF-PI aerogels were also discussed. The coupling use of supercritical ethanol drying with the addition of ceramic fibers is preferred. This preferred condition gives birth to low-shrinkage CF-PI aerogel composites, which also stand out for their integrated advantages include high thermal stability, low thermal conductivity, and high mechanical strength. These advantages attribute to CF-PI aerogel composites substantial potential for a wide range of applications, particularly as high-performance thermal insulation materials for extreme conditions. Full article
structure of the resulting ceramic fiber-reinforced PI (CF-PI) aerogel composites as well as their performance in thermal decomposition, thermal insulation, and compression resistance were characterized. The results revealed that the CF-PI aerogel composites dried by supercritical ethanol achieved greatly reduced shrinkage as low as 5.0 vol.% and low thermal conductivity ranging from 31.2 mW·m−1·K−1 to 35.3 mW·m−1·K−1, showcasing their excellent performance in shape stability and thermal insulation. These composites also inherited the superior residue-forming ability of ceramic fibers and the robust mechanical attributes of PI, thereby exhibiting enhanced thermal stability and compression resistance. Besides, the effects of different drying conditions on the structure and properties of CF-PI aerogels were also discussed. The coupling use of supercritical ethanol drying with the addition of ceramic fibers is preferred. This preferred condition gives birth to low-shrinkage CF-PI aerogel composites, which also stand out for their integrated advantages include high thermal stability, low thermal conductivity, and high mechanical strength. These advantages attribute to CF-PI aerogel composites substantial potential for a wide range of applications, particularly as high-performance thermal insulation materials for extreme conditions. Full article
(This article belongs to the Special Issue Recent Progress and Development of Advanced Aerogels: Latest Processing Methods, Improved Properties and Application)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Non-Covalent Cross-Linking Hydrogel: A New Method for Visceral Hemostasis
by
Chenyu Zhao, Han Wang, Xue Sun, Ying Liu, Jingjing Chen, Jiaqi Li, Fanshan Qiu and Qianqian Han
Gels 2024, 10(5), 326; https://doi.org/10.3390/gels10050326 - 10 May 2024
Abstract
Excessive blood loss could lead to pathological conditions such as tissue necrosis, organ failure, and death. The limitations of recently developed hemostatic approaches, such as their low mechanical strength, inadequate wet tissue adhesion, and weak hemostatic activity, pose challenges for their application in
[...] Read more.
Excessive blood loss could lead to pathological conditions such as tissue necrosis, organ failure, and death. The limitations of recently developed hemostatic approaches, such as their low mechanical strength, inadequate wet tissue adhesion, and weak hemostatic activity, pose challenges for their application in controlling visceral bleeding. In this study, a novel hydrogel (CT) made of collagen and tannic acid (TA) was proposed. By altering the proportions between the two materials, the mechanical properties, adhesion, and coagulation ability were evaluated. Compared to commercial hydrogels, this hydrogel has shown reduced blood loss and shorter hemostatic time in rat hepatic and cardiac bleeding models. This was explained by the hydrogel’s natural hemostatic properties and the significant benefits of wound closure in a moist environment. Better biodegradability was achieved through the non-covalent connection between tannic acid and collagen, allowing for hemostasis without hindering subsequent tissue repair. Therefore, this hydrogel is a new method for visceral hemostasis that offers significant advantages in treating acute wounds and controlling major bleeding. And the production method is simple and efficient, which facilitates its translation to clinical applications.
Full article
(This article belongs to the Special Issue Bio-Based Hydrogels: Design, Synthesis and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Polymer and Crosslinker Concentration on Static and Dynamic Gelation Behavior of Phenolic Resin Hydrogel
by
Wenjuan Ji, Bei Chang, Haiyang Yu, Yilin Li and Weiqiang Song
Gels 2024, 10(5), 325; https://doi.org/10.3390/gels10050325 - 9 May 2024
Abstract
The application results of profile control and water plugging technology are highly related to the gelation time and strength of phenolic resin hydrogel. In this work, a hydrogel solution was prepared by fully mixing the prepared polymer solution with a crosslinker. The static
[...] Read more.
The application results of profile control and water plugging technology are highly related to the gelation time and strength of phenolic resin hydrogel. In this work, a hydrogel solution was prepared by fully mixing the prepared polymer solution with a crosslinker. The static gelation process of PFR hydrogel in ampoule bottles and porous media was analyzed by changes in the viscosity and residual resistance coefficient. Then, the dynamic gelation of the PFR hydrogel in porous media was tested using a circulating flow device, and the changes in viscosity and injection pressure were analyzed during the dynamic gelation process. Finally, the effects of the polymer concentration and crosslinker concentration on dynamic gelation were analyzed. The initial gelation time and final gelation time in porous media were 1–1.5 times and 1.5–2 times those in ampoule bottles under static conditions, respectively. The initial dynamic gelation time in porous media was 2–2.5 times and 1.5–2 times the initial static gelation times in ampoule bottles and porous media, respectively. The final dynamic gelation time was four times and two times the initial static gelation times in ampoule bottles and porous media, respectively. The production after dynamic gelation in porous media comprised hydrogel aggregates and water fluid, leading to a high injection pressure and low viscosity of the produced liquid. As the concentration of polymer and crosslinker increased, the dynamic gelation time was shortened and the gel strength was increased. In the dynamic gelation process in porous media, the phenol resin hydrogel could migrate deeply, but it was limited by the concentrations of the polymer and crosslinker. The results of subsequent water flooding showed that the polymer hydrogel had a good plugging ability after dynamic gelation. The deep reservoir could only be blocked off in the subsequent water flooding process when the migration of hydrogel happened in the dynamic gelation process.
Full article
(This article belongs to the Special Issue Gels for Oil and Gas Industry Applications (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Terahertz Spectroscopic Insight into the Hydrogelation of Copper Ion-Coordinated Poly(vinyl alcohol)
by
Wenjing Wang, Yadi Wang, Junhong Lü and Xueling Li
Gels 2024, 10(5), 324; https://doi.org/10.3390/gels10050324 - 9 May 2024
Abstract
Metal-coordinated hydrogels are becoming increasingly popular in the biomedical field due to their unique properties. However, the mechanism behind gel forming involving metal ions is not yet fully understood. In this work, terahertz spectroscopy was used to investigate the role of interfacial water
[...] Read more.
Metal-coordinated hydrogels are becoming increasingly popular in the biomedical field due to their unique properties. However, the mechanism behind gel forming involving metal ions is not yet fully understood. In this work, terahertz spectroscopy was used to investigate the role of interfacial water in the gelation process of copper ion-coordinated poly(vinyl alcohol) hydrogels. The results showed that the binding of copper ions could alter the interfacial hydration dynamics of the poly(vinyl alcohol) polymers. Combined with the results of differential scanning calorimetry (DSC), we propose a possible hydration layer-mediated mechanism for the formation of cooper ion-coordinated hydrogel during the freeze–thaw cycle. These results highlight the value of terahertz spectroscopy as a sensor for studying the hydration process in hydrogels and provide an important clue for understanding the mechanism of hydrogelation in ion-coordinated hydrogels.
Full article
(This article belongs to the Special Issue Properties and Structure of Hydrogel-Related Materials)
►▼
Show Figures
Graphical abstract
Open AccessEditorial
Editorial for the Special Issue “Hydrogels for 3D Printing”
by
Enrique Aguilar and Helena Herrada-Manchón
Gels 2024, 10(5), 323; https://doi.org/10.3390/gels10050323 - 9 May 2024
Abstract
Hydrogels, which are three-dimensional networks of hydrophilic polymers capable of absorbing and retaining large amounts of water, have emerged as versatile materials with vast potential in various fields [...]
Full article
(This article belongs to the Special Issue Hydrogels for 3D Printing)
Open AccessArticle
Growth of Romaine Lettuce in Eggshell Powder Mixed Alginate Hydrogel in an Aeroponic System for Water Conservation and Vitamin C Biofortification
by
Fariha Afnan, Md Nayeem Hasan Kashem, Rutwik Joshi, Catherine Simpson and Wei Li
Gels 2024, 10(5), 322; https://doi.org/10.3390/gels10050322 - 9 May 2024
Abstract
Vitamin C is crucial for physical well-being, and its deficiency can lead to severe health consequences. Biofortification has been used to address this deficiency by enhancing vitamin C in plants. Additionally, soilless agriculture has been used to conserve and optimize water use in
[...] Read more.
Vitamin C is crucial for physical well-being, and its deficiency can lead to severe health consequences. Biofortification has been used to address this deficiency by enhancing vitamin C in plants. Additionally, soilless agriculture has been used to conserve and optimize water use in comparison to conventional agriculture. While hydrogels have been shown to improve water conservation and are used for biofortification in crops, their application has only been explored in soil-based and hydroponic farming. The aeroponics system is a plant-growing method that has shown potential for increasing yields and biomass while conserving water and nutrients. In this paper, we have developed an aeroponic-compatible medium to grow romaine lettuce (Lactuca sativa L.) with eggshell powder (ESP) mixed with calcium-alginate hydrogel as a substrate and nutrient source aiming to conserve water and incorporate vitamin C through biofortification. Herein, lower water spray time and higher intervals, with varied gel types and ESP concentrations, resulted in healthy lettuce growth. Plants treated with 0.5% ascorbic acid-absorbed ESP-mixed alginate hydrogel for biofortification showed higher levels of vitamin C compared to the traditional method. This study suggests using an alginate hydrogel–ESP-based substrate in aeroponics to reduce water usage and enhance plant biofortification of vitamin C.
Full article
(This article belongs to the Special Issue Application of Gel Technology in Food Industry and Environmental Engineering)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Structural Analyses of Polysaccharides Extracted from Cyanobacterial Extracellular Gels and Oriented Liquid Crystalline Microfiber Processing by Poly(vinyl alcohol)-Assisted Electrospinning
by
Chizu Mitani, Maiko Okajima, Tomomi Ohashira, Mohammad Asif Ali, Toshiaki Taniike and Tatsuo Kaneko
Gels 2024, 10(5), 321; https://doi.org/10.3390/gels10050321 - 7 May 2024
Abstract
Sacran is a supergiant cyanobacterial polysaccharide that forms mesogenic supercoil rods that exhibit liquid crystalline (LC) gels at deficient concentrations of around 0.5 wt%, and has several bioactive stimuli-responsive functions. Here, we attempted to form oriented microfibers of sacran by electrospinning, following structural
[...] Read more.
Sacran is a supergiant cyanobacterial polysaccharide that forms mesogenic supercoil rods that exhibit liquid crystalline (LC) gels at deficient concentrations of around 0.5 wt%, and has several bioactive stimuli-responsive functions. Here, we attempted to form oriented microfibers of sacran by electrospinning, following structural analyses of the sacran rods. A heterogeneous acid-hydrolysis method using a protonated cation-exchange resin was adopted to examine the short-time exposition of concentrated acid to sacran rods. From the supernatant, the oligomeric fraction that was soluble in water and methanol was isolated. The oligomeric fraction had a main sugar ratio of α-Glc:β-Glc:α-Xyl:β-Xyl:α-Rha of 2:5:1.5:1.5:4 (Glc:Xyl:Rha = 7 (=4 + 3):3:4), and it was speculated that the sacran structure includes rhamnoglucan and xyloglucan (4:3), which are generally rigid enough to exhibit LC. To make oriented microfibers of LC sacran, solubility testing was performed on sacran to find good new solvents of polyhydroxy alcohols such as ethylene glycol, 1,2-propanediol, and glycerol. The oriented film was prepared from a sacran aqueous solution where calcium compound particles deposited on the film are different from polyhydroxy alcohol solutions. Although sacran could not form microfibers by itself, polymer composite microfibers of sacran with poly(vinyl alcohol) were prepared by electrospinning. Cross-polarizing microscopy revealed the molecular orientation of the microfibers.
Full article
(This article belongs to the Special Issue Stimuli-Responsive Composite Gels)
►▼
Show Figures
Figure 1
Open AccessArticle
Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications
by
Boning Jiang, Yuhan Zhang, Ruiyang Wang, Ting Wang and En Zeng
Gels 2024, 10(5), 320; https://doi.org/10.3390/gels10050320 - 7 May 2024
Abstract
Traditional anti-corrosion and anti-fouling coatings struggle against the harsh marine environment. Our study tackled this by introducing a novel dual-layer hydrogel (A-H DL) coating system. This system combined a Cu2O–SiO2–acrylic resin primer for anchoring and controlled copper ion release
[...] Read more.
Traditional anti-corrosion and anti-fouling coatings struggle against the harsh marine environment. Our study tackled this by introducing a novel dual-layer hydrogel (A-H DL) coating system. This system combined a Cu2O–SiO2–acrylic resin primer for anchoring and controlled copper ion release with a dissipative double-network double-anchored hydrogel (DNDAH) boasting superior mechanical strength and anti-biofouling performance. An acrylamide monomer was copolymerized and cross-linked with a coupling agent to form the first irreversible network and first anchoring, providing the DNDAH coating with mechanical strength and structural stability. Alginate gel microspheres (AGMs) grafted with the same coupling agent formed the second reversible network and second anchoring, while coordinating with Cu2+ released from the primer to form a system buffering Cu2+ release, enabling long-term antibacterial protection and self-healing capabilities. FTIR, SEM, TEM, and elemental analyses confirmed the composition, morphology, and copper distribution within the A-H DL coating. A marine simulation experiment demonstrated exceptional stability and anti-fouling efficacy. This unique combination of features makes A-H DL a promising solution for diverse marine applications, from ship hulls to aquaculture equipment.
Full article
(This article belongs to the Special Issue Functionalized Gels for Environmental Applications (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Design and Synthesis of P(AAm-co-NaAMPS)-Alginate-Xanthan Hydrogels and the Study of Their Mechanical and Rheological Properties in Artificial Vascular Graft Applications
by
Zhutong Li, Joshua Giarto, Jue Zhang, Jinsu Gim, Edward Chen, Eduardo Enriquez, Lauren Jafuta, Esha Mahalingam and Lih-Sheng Turng
Gels 2024, 10(5), 319; https://doi.org/10.3390/gels10050319 - 7 May 2024
Abstract
Cardiovascular diseases (CVDs) are the number one cause of mortality among non-communicable diseases worldwide. Expanded polytetrafluoroethylene (ePTFE) is a widely used material for making artificial vascular grafts to treat CVDs; however, its application in small-diameter vascular grafts is limited by the issues of
[...] Read more.
Cardiovascular diseases (CVDs) are the number one cause of mortality among non-communicable diseases worldwide. Expanded polytetrafluoroethylene (ePTFE) is a widely used material for making artificial vascular grafts to treat CVDs; however, its application in small-diameter vascular grafts is limited by the issues of thrombosis formation and intimal hyperplasia. This paper presents a novel approach that integrates a hydrogel layer on the lumen of ePTFE vascular grafts through mechanical interlocking to efficiently facilitate endothelialization and alleviate thrombosis and restenosis problems. This study investigated how various gel synthesis variables, including N,N’-Methylenebisacrylamide (MBAA), sodium alginate, and calcium sulfate (CaSO4), influence the mechanical and rheological properties of P(AAm-co-NaAMPS)-alginate-xanthan hydrogels intended for vascular graft applications. The findings obtained can provide valuable guidance for crafting hydrogels suitable for artificial vascular graft fabrication. The increased sodium alginate content leads to increased equilibrium swelling ratios, greater viscosity in hydrogel precursor solutions, and reduced transparency. Adding more CaSO4 decreases the swelling ratio of a hydrogel system, which offsets the increased swelling ratio caused by alginate. Increased MBAA in the hydrogel system enhances both the shear modulus and Young’s modulus while reducing the transparency of the hydrogel system and the pore size of freeze-dried samples. Overall, Hydrogel (6A12M) with 2.58 mg/mL CaSO4 was the optimal candidate for ePTFE–hydrogel vascular graft applications due to its smallest pore size, highest shear storage modulus and Young’s modulus, smallest swelling ratio, and a desirable precursor solution viscosity that facilitates fabrication.
Full article
(This article belongs to the Special Issue Hydrogels: Synthesis, Characterization and Applications (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Gelatin-Based Hydrogel Functionalized with Dopamine and Layered Double Hydroxide for Wound Healing
by
Weijie Zhang, Bing Zhang, Yihu Wang, Xiaofeng Cao, Jianing Wang, Weipeng Lu and Yanchuan Guo
Gels 2024, 10(5), 318; https://doi.org/10.3390/gels10050318 - 7 May 2024
Abstract
Hydrogels with adhesion properties and a wetted structure are promising alternatives to traditional wound dressing materials. The insufficiency of gelatin hydrogels in terms of their adhesive and mechanical strength limits their application in wound dressings. This work presents the design and preparation of
[...] Read more.
Hydrogels with adhesion properties and a wetted structure are promising alternatives to traditional wound dressing materials. The insufficiency of gelatin hydrogels in terms of their adhesive and mechanical strength limits their application in wound dressings. This work presents the design and preparation of a gelatin-based hydrogel functionalized with dopamine (DA) and layered double hydroxide (LDH). The combination of DA and LDH improves the hydrogel’s adhesion properties in terms of interfacial adhesion and inner cohesion. Hydrogels with 8% DA and 4% LDH attained the highest adhesion strength of 266.5 kPa, which increased to 295.5 and 343.3 kPa after hydrophobically modifying the gelatin with octanoyl and decanoyl aldehydes, respectively. The gelatin-based hydrogels also demonstrated a macroporous structure, excellent biocompatibility, and a good anti-inflammatory effect. The developed hydrogels accelerated wound healing in Sprague Dawley rat skin full-thickness wound models.
Full article
(This article belongs to the Special Issue Design and Development of Gelatin-Based Materials)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Adsorption Efficiency of Cadmium (II) by Different Alkali-Activated Materials
by
Nataša Mladenović Nikolić, Ljiljana Kljajević, Snežana S. Nenadović, Jelena Potočnik, Sanja Knežević, Sabina Dolenec and Katarina Trivunac
Gels 2024, 10(5), 317; https://doi.org/10.3390/gels10050317 - 5 May 2024
Abstract
The objective of this study was to demonstrate the potential utilization of fly ash (FA), wood ash (WA), and metakaolin (MK) in developing new alkali-activated materials (AAMs) for the removal of cadmium ions from waste water. The synthesis of AAMs involved the dissolution
[...] Read more.
The objective of this study was to demonstrate the potential utilization of fly ash (FA), wood ash (WA), and metakaolin (MK) in developing new alkali-activated materials (AAMs) for the removal of cadmium ions from waste water. The synthesis of AAMs involved the dissolution of solid precursors, FA, WA, and MK, by a liquid activator (Na2SiO3 and NaOH). In concentrated solutions of the activator, the formation of an aluminosilicate gel structure occurred. DRIFT spectroscopy of the AAMs indicated main vibration bands between 1036 cm−1 and 996 cm−1, corresponding to Si-O-Si/Si-O-Al bands. Shifting vibration bands were seen at 1028 cm−1 to 1021 cm−1, indicating that the Si-O-Si/Si-O-Al bond is elongating, and the bond angle is decreasing. Based on the X-ray diffraction results, alkali-activated samples consist of an amorphous phase and residual mineral phases. The characteristic “hump” of an amorphous phase in the range from 20 to 40° 2θ was observed in FA and in all AWAFA samples. By the XRD patterns of the AAMs obtained by the activation of a solid three-component system, a new crystalline phase, gehlenite, was identified. The efficiency of AAMs in removing cadmium ions from aqueous solutions was tested under various conditions. The highest values of adsorption capacity, 64.76 mg/g (AWAFA6), 67.02 mg/g (AWAFAMK6), and 72.84 mg/g mg/g (AWAMK6), were obtained for materials activated with a 6 M NaOH solution in the alkali activator. The Langmuir adsorption isotherm and pseudo-second kinetic order provided the best fit for all investigated AAMs.
Full article
(This article belongs to the Special Issue Physical and Mechanical Properties of Polymer Gels (2nd Edition))
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Gels Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Conferences
Special Issues
Special Issue in
Gels
Gel for Oil-Based Drilling Fluid
Guest Editor: Jintang WangDeadline: 20 May 2024
Special Issue in
Gels
Physically Cross-Linked Gels and Their Applications
Guest Editors: Regina R. Vildanova, Sergey V. Kolesov, Vitaliy V. KhutoryanskiyDeadline: 30 May 2024
Special Issue in
Gels
Dynamics of Polymeric Gels
Guest Editors: Shensheng Chen, Domenico LarobinaDeadline: 20 June 2024
Special Issue in
Gels
Flocculation and Electrokinetics in Bioresources and Environment: Related to Gels
Guest Editors: Kazuyoshi Ogawa, Yasuhisa Adachi, Hiroyuki OhshimaDeadline: 30 June 2024
Topical Collections
Topical Collection in
Gels
Recent Advances and Future Perspectives in Stimuli-Responsive Gels
Collection Editors: Dirk Kuckling, Sandra Van Vlierberghe
Topical Collection in
Gels
Recent Advances and Future Perspectives in Organogels and Organogelators Research
Collection Editor: Jean-Michel Guenet
Topical Collection in
Gels
Hydrogel in Tissue Engineering and Regenerative Medicine
Collection Editor: Esmaiel Jabbari