Journal Description
Inorganics
Inorganics
is an international, scientific, peer-reviewed, open access journal on inorganic chemistry published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q2 (Chemistry, Inorganic & Nuclear) / CiteScore - Q2 (Inorganic Chemistry)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 12.8 days after submission; acceptance to publication is undertaken in 2.9 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our authors say about Inorganics.
Impact Factor:
2.9 (2022);
5-Year Impact Factor:
2.5 (2022)
Latest Articles
MOF-Derived Fe2CoSe4@NC and Fe2NiSe4@NC Composite Anode Materials towards High-Performance Na-Ion Storage
Inorganics 2024, 12(6), 165; https://doi.org/10.3390/inorganics12060165 (registering DOI) - 12 Jun 2024
Abstract
Binary transition metal selenides (BTMSs) are more promising than single transition metal selenides (TMS) as anode materials of sodium-ion batteries (SIBs). However, it is still very challenging to prepare high-performance BTMSs in the pure phase, instead of a mixture of two TMSs. In
[...] Read more.
Binary transition metal selenides (BTMSs) are more promising than single transition metal selenides (TMS) as anode materials of sodium-ion batteries (SIBs). However, it is still very challenging to prepare high-performance BTMSs in the pure phase, instead of a mixture of two TMSs. In this study, a binary metal center-based MOF derived selenization strategy was developed to prepare iron–cobalt selenide (Fe2CoSe4@NC) and iron–nickel selenide (Fe2NiSe4@NC) nanocomposites in the single phase and when wrapped with carbon layers. As the anode material of SIBs, Fe2CoSe4@NC exhibits higher long-term cycling performance than Fe2NiSe4@NC, maintaining a capacity of 352 mAh g−1 after 2100 cycles at 1.0 A g−1, which is ascribed to the higher percentage of the nanopores, larger lattice spacing, and faster Na+ diffusion rate in the electrode materials of the former rather than the latter.
Full article
(This article belongs to the Special Issue Advanced Electrode Materials for Energy Storage Devices)
►
Show Figures
Open AccessArticle
CuFe2O4 Nanofiber Incorporated with a Three-Dimensional Graphene Sheet Composite Electrode for Supercapacitor and Electrochemical Sensor Application
by
Sivaramakrishnan Vinothini, Arjunan Karthi Keyan, Subramanian Sakthinathan, Te-Wei Chiu and Naratip Vittayakorn
Inorganics 2024, 12(6), 164; https://doi.org/10.3390/inorganics12060164 - 12 Jun 2024
Abstract
The demand for regenerative energy and electric automotive applications has grown in recent decades. Supercapacitors have multiple applications in consumer alternative electronic products due to their excellent energy density, rapid charge/discharge time, and safety. CuFe2O4-incorporated three-dimensional graphene sheet (3DGS)
[...] Read more.
The demand for regenerative energy and electric automotive applications has grown in recent decades. Supercapacitors have multiple applications in consumer alternative electronic products due to their excellent energy density, rapid charge/discharge time, and safety. CuFe2O4-incorporated three-dimensional graphene sheet (3DGS) nanocomposites were studied by different characterization studies such as X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. The electrochemical studies were based on cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), and electrochemical impedance spectroscopy (EIS) measurements. As prepared, 3DGS/CuFe2O4 nanocomposites exhibited an excellent surface area, high energy storage with appreciable durability, and excellent electrocatalysis properties. A supercapacitor with 3DGS/CuFe2O4-coated nickel foam (NF) electrodes exhibited an excellent specific capacitance of 488.98 Fg−1, a higher current density, as well as a higher power density. After charge–discharge cycles in a 2.0 M KOH aqueous electrolyte solution, the 3DGS/CuFe2O4/NF electrodes exhibited an outstanding cyclic stability of roughly 95% at 10 Ag−1, indicating that the prepared nanocomposites could have the potential for energy storage applications. Moreover, the 3DGS/CuFe2O4 electrode exhibited an excellent electrochemical detection of chloramphenicol with a detection limit of 0.5 µM, linear range of 5–400 µM, and electrode sensitivity of 3.7478 µA µM−1 cm−2.
Full article
(This article belongs to the Special Issue Advanced Inorganic Nanomaterials for Energy Conversion and Catalysis Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Electronic and Steric Effects on Oxygen Reactivities of NiFeSe Complexes Related to O2-Damaged [NiFeSe]-Hydrogenases’ Active Site
by
Yuchen Qiao, Enting Xu, Yameng Hao, Xuemei Yang and Ming Ni
Inorganics 2024, 12(6), 163; https://doi.org/10.3390/inorganics12060163 - 10 Jun 2024
Abstract
Hydrogen has the potential to serve as a new energy resource, reducing greenhouse gas emissions that contribute to climate change. Natural hydrogenases exhibit impressive catalytic abilities for hydrogen production, but they often lack oxygen tolerance. Oxygen-tolerant hydrogenases can work under oxygen by reacting
[...] Read more.
Hydrogen has the potential to serve as a new energy resource, reducing greenhouse gas emissions that contribute to climate change. Natural hydrogenases exhibit impressive catalytic abilities for hydrogen production, but they often lack oxygen tolerance. Oxygen-tolerant hydrogenases can work under oxygen by reacting with oxygen to form inactive states, which can be reactivated to catalytic states by oxygen atom removal. Herein, we synthesized three NiFeSe complexes: (NiSe(CH3)FeCp, NiSe(CH3)FeCp* and NiSe(PhNMe2)FeCp) with features of active sites of [NiFeSe]-H2ases, which are the oxygen-tolerant hydrogenases, and we investigated the influence of electronic and steric factors on the oxygen reaction of these “biomimetic” complexes. In our research, we found that they react with oxygen, forming 1-oxygen species, which is related to the O2-damaged [NiFeSe] active site. Through a comparative analysis of oxygen reactions, we have discovered that electronic factors and steric hindrance on Se play a significant role in determining the oxygen reactivity of NiFe complexes related to hydrogenases’ active sites.
Full article
(This article belongs to the Special Issue Metal Complexes Diversity: Synthesis, Conformations, and Bioactivity)
►▼
Show Figures
Figure 1
Open AccessArticle
Limited Domain SnSb@N-PC Composite Material as a High-Performance Anode for Sodium Ion Batteries
by
Zhaomeng Liu, Hailong Ren, Shizheng Fu, Wentao Yang, Yihua Li, Yang Jiao and Botao Zhang
Inorganics 2024, 12(6), 162; https://doi.org/10.3390/inorganics12060162 - 7 Jun 2024
Abstract
Anode materials have a vital influence on the performance of sodium ion batteries. In this paper, SnSb nanoparticles were distributed uniformly in N-doped three-dimensional porous carbon (SnSb@N-PC), which effectively avoided the agglomeration of alloy nanoparticles and greatly improved the capacity retention rate of
[...] Read more.
Anode materials have a vital influence on the performance of sodium ion batteries. In this paper, SnSb nanoparticles were distributed uniformly in N-doped three-dimensional porous carbon (SnSb@N-PC), which effectively avoided the agglomeration of alloy nanoparticles and greatly improved the capacity retention rate of SnSb@N-PC. At the same time, the porous carbon substrate brings higher conductivity, larger specific surface area, and more sodium storage sites, which makes the material obtain excellent sodium storage properties. The first discharge-specific capacity of SnSb@N-PC was 846.3 mAh g−1 at the current density of 0.1 A g−1, and the specific capacity remained at 483 mAh g−1 after 100 cycles. Meanwhile, the specific capacity of SnSb@N-PC was kept at 323 mAh g−1 after 400 cycles at a high current density of 1.5 A g−1, which indicated that the recombination of SnSb with porous carbon played a key role in the electrochemical performance of SnSb. The contribution of capacitance contrast capacity was able to reach more than 90% by the cyclic voltammetry (CV) test at high sweep speed, and larger Na+ diffusivity was obtained by the constant current intermittent titration technique (GITT) test, which explains the good rate performance of SnSb@N-PC.
Full article
(This article belongs to the Special Issue New Insights in Potassium Ion Batteries: Materials and Properties)
Open AccessArticle
Alkali Metal-Ion Binding by a Model Macrocycle Containing a C-I···N Halogen Bonded Network: A DFT Study of C-I···M+ and N···M+ Binding Interactions, M+ = Li+, Na+, K+, and Rb+
by
Rubén D. Parra
Inorganics 2024, 12(6), 161; https://doi.org/10.3390/inorganics12060161 - 6 Jun 2024
Abstract
The complexation of an alkali metal ion by a model macrocycle is examined using the M05-2X/DGDZVP DFT method. The macrocycle is built by connecting three cyclopenta[b]pyrrole motifs with alternating acetylene and ethylene linkages. Replacing one of the C-H bonds in each motif with
[...] Read more.
The complexation of an alkali metal ion by a model macrocycle is examined using the M05-2X/DGDZVP DFT method. The macrocycle is built by connecting three cyclopenta[b]pyrrole motifs with alternating acetylene and ethylene linkages. Replacing one of the C-H bonds in each motif with a C-I bond allows for the formation of three intramolecular C-I···N halogen bonds. Two distinct binding modes were found for the complexation of each metal ion. In one mode, the binding of the ion occurs solely by the iodine atoms, via I···M+ interactions, while maintaining the integrity of the halogen bonds. The complexation energies are in the range −66 to −35 kcal/mol. In the other mode, the binding of the ion includes one nitrogen atom as well, with binding energies in the range of −71 to −38 kcal/mol. In this binding mode, the halogen bond network is weakened. The presence and strength of the interactions are further examined using AIM and NBO calculations. Lastly, the geometries for the transition state structures linking the less stable to the more stable metal ion complexes were obtained, and their calculated Gibbs free energy barriers were found in the range of 1.6 to 1.9 kcal/mol.
Full article
(This article belongs to the Special Issue Studies on Metal-Ion Binding by Halogen-Bonded Structures)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Physicochemical and Toxicological Screening of Silver Nanoparticle Biosynthesis from Punica granatum Peel Extract
by
Oana Silvana Sarău, Elena-Alina Moacă, Alexandra-Denisa Semenescu, Raluca Dumitru, Alex-Robert Jijie, Marioara Poenaru, Cristina-Adriana Dehelean and Adelina Chevereşan
Inorganics 2024, 12(6), 160; https://doi.org/10.3390/inorganics12060160 - 4 Jun 2024
Abstract
►▼
Show Figures
Silver nanoparticles (AgNPs) were successfully synthesized via the biological route using a 1 M silver nitrate (AgNO3) aqueous solution and an ethanolic peel extract of Punica granatum (Pg), at 60 °C. The physicochemical analysis revealed the formation of green synthesized Pg-AgNPs
[...] Read more.
Silver nanoparticles (AgNPs) were successfully synthesized via the biological route using a 1 M silver nitrate (AgNO3) aqueous solution and an ethanolic peel extract of Punica granatum (Pg), at 60 °C. The physicochemical analysis revealed the formation of green synthesized Pg-AgNPs with a semi-spherical shape, non-uniformly distributed, and a particle size distribution between 5 and 100 nm. As regards the preliminary in vitro toxicological screening, the green synthesized Pg-AgNPs did not significantly affect the neonatal BALB/c epidermal cells’ viability (JB6 Cl 41-5a) at lower concentrations and did not produce visible changes in the morphology of the JB6 Cl 41-5a cells. In contrast, at higher concentrations (>50 μg/mL), the green Pg-AgNPs exhibited an important decrease in cell viability and confluency. In addition, the impact of Pg-AgNPs on cell membrane integrity suggests a potential cytotoxic effect. Contrary to the in vitro assays, after the evaluation of the anti-irritant effect in ovo, the lower concentration of Pg-AgNPs (10 μg/mL) produced hemorrhage and lysis when applied to the chorioallantoic membrane, while at 50 μg/mL, only slight coagulation was observed. Therefore, regarding the in ovo toxicological screening, the higher concentration of the Pg-AgNPs exhibited a better safety profile compared to the lower concentration, as indicated by the irritation score.
Full article
Figure 1
Open AccessArticle
Mononuclear Fe(III) Schiff Base Complex with Trans-FeO4N2 Chromophore of o-Aminophenol Origin: Synthesis, Characterisation, Crystal Structure, and Spin State Investigation
by
Dawit Tesfaye, Jonas Braun, Mamo Gebrezgiabher, Juraj Kuchár, Juraj Černák, Taju Sani, Abbasher Gismelseed, Tim Hochdörffer, Volker Schünemann, Christopher E. Anson, Annie K. Powell and Madhu Thomas
Inorganics 2024, 12(6), 159; https://doi.org/10.3390/inorganics12060159 - 3 Jun 2024
Abstract
A new iron(III) complex (Et3NH)2[Fe(L)2](ClO4)·MeOH (1) where H2L = 2-{(E)-[2-hydroxyphenyl)imino]methyl}phenol has been synthesised and characterised by single crystal XRD, elemental analysis and DC magnetic susceptibility measurements. The dianionic ligands L2− coordinate in
[...] Read more.
A new iron(III) complex (Et3NH)2[Fe(L)2](ClO4)·MeOH (1) where H2L = 2-{(E)-[2-hydroxyphenyl)imino]methyl}phenol has been synthesised and characterised by single crystal XRD, elemental analysis and DC magnetic susceptibility measurements. The dianionic ligands L2− coordinate in a tridentate fashion with the Fe(III) through their deprotonated phenolic oxygens and azomethine nitrogen atoms, resulting in a trans-FeO4N2 chromophore. Variable-temperature magnetic measurements were performed between 300 and 5 K under an applied field of 0.1 T and show that 1 is in the high spin state (S = 5/2) over the whole measured temperature range. This is confirmed by Mössbauer spectroscopy at 77 and 300 K.
Full article
(This article belongs to the Section Coordination Chemistry)
►▼
Show Figures
Figure 1
Open AccessArticle
Evaluation of DNA and BSA-Binding, Nuclease Activity, and Anticancer Properties of New Cu(II) and Ni(II) Complexes with Quinoline-Derived Sulfonamides
by
Tamara Liana Topală, Ionel Fizeşan, Andreea-Elena Petru, Alfonso Castiñeiras, Andreea Elena Bodoki, Luminița Simona Oprean, Marcos Escolano and Gloria Alzuet-Piña
Inorganics 2024, 12(6), 158; https://doi.org/10.3390/inorganics12060158 - 1 Jun 2024
Abstract
Four complexes of essential metal ions, Cu(II) and Ni(II), with the new sulfonamide ligand N-(pyridin-2-ylmethyl)quinoline-8-sulfonamide (HQSMP) were synthesized and physicochemically and structurally characterized. Complex [Cu(QSMP)Cl]n (2) consists of a polymeric chain formed by distorted square pyramidal units. In 2
[...] Read more.
Four complexes of essential metal ions, Cu(II) and Ni(II), with the new sulfonamide ligand N-(pyridin-2-ylmethyl)quinoline-8-sulfonamide (HQSMP) were synthesized and physicochemically and structurally characterized. Complex [Cu(QSMP)Cl]n (2) consists of a polymeric chain formed by distorted square pyramidal units. In 2, the sulfonamide ligand acts as a bridge coordinating to one Cu(II) through its three N atoms and to another metal ion via one O atom in the sulfonamido group, while the pentacoordinate complex [Cu(QSMP)(C6H5COO)] (3) presents a highly distorted square pyramidal geometry. Complex [Ni(QSMP)(C6H5COO)(CH3OH)][Ni(QSMP)(CH3COO)(CH3OH)] (4) consists of two mononuclear entities containing different anion coligands, either a benzoate or an acetate group. Both units exhibit a distorted octahedral geometry. The interaction of the complexes with CT-DNA was studied by means of UV-Vis and fluorescence spectroscopy, interestingly revealing that the Ni(II) complex presents the highest affinity towards the nucleic acid. Complexes 1 and 2 are able to cleave DNA. Both compounds show promising nuclease activity at relatively low concentrations by mediating the production of a reactive oxygen species (ROS). The interaction of the four complexes with bovine serum albumin (BSA) was also investigated, showing that the compounds can bind to serum proteins. The antitumor potential of complexes 1 and 2 was evaluated against the A549 lung adenocarcinoma cell line, revealing cytotoxic properties that were both dose- and time-dependent.
Full article
(This article belongs to the Special Issue Metal-Based Compounds: Relevance for the Biomedical Field)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Hybrid Gold-Based Perovskite Derivatives: Synthesis, Properties, and Prospects in Photovoltaics
by
Chang Liu, Xifeng Fu, Zi-Ang Nan, Zilong Zhang, Lingyi Meng and Peng Gao
Inorganics 2024, 12(6), 157; https://doi.org/10.3390/inorganics12060157 - 31 May 2024
Abstract
Hybrid gold-based perovskite derivatives typically exhibit low optical bandgaps and high optical absorption coefficients, rendering them promising for photovoltaic applications. In this study, we successfully synthesized six new hybrid gold-based perovskite derivatives, namely [(C6H8N2)(AuI4)(AuI2
[...] Read more.
Hybrid gold-based perovskite derivatives typically exhibit low optical bandgaps and high optical absorption coefficients, rendering them promising for photovoltaic applications. In this study, we successfully synthesized six new hybrid gold-based perovskite derivatives, namely [(C6H8N2)(AuI4)(AuI2)](3AMPY), [(C6H14N2)(AuI4)(AuI2)](3AMP), [(C8H12N)(AuI4)](2PEAI), [(C4H14N2O)(AuI4)2](OBA), [(C6H18N2O2)3(AuI4)4(I3)2](DDA), and [(C10H26N2O3)(AuI4)(I3)](TOTA), through a straightforward and efficient hydrothermal method, achieving millimeter-sized single crystals. The structural analysis of the single crystals revealed variations in crystal structures arising from differences in constituent units and their spatial positioning relationships. First-principles calculations ascertained their high optical absorption coefficients in the visible light spectrum and indirect bandgap properties. Theoretical models indicated that the spectroscopic limited maximum efficiency (SLME) values of 3AMPY, 2PEAI, DDA, and TOTA approached approximately 30% in films of 0.5 μm thickness, signifying their potential candidacy as solar cell absorbers.
Full article
(This article belongs to the Special Issue New Semiconductor Materials for Energy Conversion)
Open AccessArticle
Orange Peel Biochar–CdS Composites for Photocatalytic Hydrogen Production
by
Xiang Li, Yuxin Zang, Jindi Zhang, Lili Zhang, Jing Zhang, Mengyang Huang and Jiaqiang Wang
Inorganics 2024, 12(6), 156; https://doi.org/10.3390/inorganics12060156 - 31 May 2024
Abstract
Orange peel biochar (C)-supported cadmium sulfide composites (CdS-C) were prepared by the combination of hydrothermal and calcination methods. The structure and morphology were characterized in detail by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The CdS-C composite with 60% CdS exhibited
[...] Read more.
Orange peel biochar (C)-supported cadmium sulfide composites (CdS-C) were prepared by the combination of hydrothermal and calcination methods. The structure and morphology were characterized in detail by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The CdS-C composite with 60% CdS exhibited the highest photocatalytic hydrogen production rate of 7.8 mmol·g−1·h−1, approximately 3.69 times higher than that of synthesized CdS without biochar. These results indicate that biochar derived from orange peel could be a low-cost, renewable, environmentally friendly, and metal-free co-catalyst for CdS, enhancing its photostability.
Full article
(This article belongs to the Special Issue Synthesis and Application of Luminescent Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Matrix Effect on Singlet Oxygen Generation Using Methylene Blue as Photosensitizer
by
Jianan Xu, Laurent Bonneviot, Yannick Guari, Cyrille Monnereau, Kun Zhang, Albert Poater, Montserrat Rodríguez-Pizarro and Belén Albela
Inorganics 2024, 12(6), 155; https://doi.org/10.3390/inorganics12060155 - 31 May 2024
Abstract
Methylene blue (MB) is a well-established and extensively studied photosensitizer for photodynamic therapy (PDT), since it can generate singlet oxygen with a high quantum yield upon irradiation within the phototherapeutic (600–950 nm) window. However, its activity can decrease due to the formation of
[...] Read more.
Methylene blue (MB) is a well-established and extensively studied photosensitizer for photodynamic therapy (PDT), since it can generate singlet oxygen with a high quantum yield upon irradiation within the phototherapeutic (600–950 nm) window. However, its activity can decrease due to the formation of dimers or higher aggregates, which can take place in an aqueous solution at relatively high concentrations. The incorporation of this molecule into a matrix can avoid this aggregation and increase its activity relative to PDT. Silica porous nanoparticles are chosen here as a matrix to host MB. The size and pore geometry are tuned in order to decrease MB leaching while maintaining good singlet oxygen generation and colloidal stability for further applications in nanomedicine. In addition, phenyl functions are grafted on the pores of the silica matrix in order to avoid MB aggregation, thereby increasing the activity of the photosensitizer in the singlet oxygen generation. DFT calculations give insight in the structure of the aggregation of the MB units, and the roles of water and organic environments are investigated through time-dependent calculations on UV-vis spectra.
Full article
(This article belongs to the Special Issue Women’s Special Issue Series: Inorganics)
►▼
Show Figures
Graphical abstract
Open AccessArticle
N-S-co-Doped Carbon Dot Blue Fluorescence Preparation and Baicalein Detection
by
Yujia Cheng, Yan Huang and Guang Yu
Inorganics 2024, 12(6), 154; https://doi.org/10.3390/inorganics12060154 - 31 May 2024
Abstract
Carbon dots (CDs) have emerged as significant fluorescent nanomaterials due to their bright, stable fluorescence, good biocompatibility, facile synthesis, etc. They are widely used in various scientific and practical applications, particularly in combination with mesoporous, florescent, or magnetic nanomaterials to enhance their properties.
[...] Read more.
Carbon dots (CDs) have emerged as significant fluorescent nanomaterials due to their bright, stable fluorescence, good biocompatibility, facile synthesis, etc. They are widely used in various scientific and practical applications, particularly in combination with mesoporous, florescent, or magnetic nanomaterials to enhance their properties. Recent research has focused on employing CDs and their composites in drug analysis, drug loading, biological imaging, disease diagnosis, and temperature sensing, with a growing interest in their biological and medical applications. In this study, we synthesized blue-fluorescent S, N-co-doped CDs (cys-CDs) using hydrothermal synthesis with L-cysteine and sodium citrate. These resulting cys-CD particles were approximately 3.8 nm in size and exhibited stable fluorescence with a quantum yield of 0.66. By leveraging the fluorescence quenching of the cys-CDs, we developed a rapid and sensitive method for baicalein detection, achieving high sensitivity in the low micromolar range with a detection limit for baicalein of 33 nM. Our investigation revealed that the fluorescence-quenching mechanism involved static quenching and inner-filter effect components. Overall, cys-CDs proved to be effective for accurate quantitative baicalein detection in real-world samples.
Full article
(This article belongs to the Special Issue Synthesis and Application of Luminescent Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Ni and Co Catalysts on Interactive Oxide Support for Anion Exchange Membrane Electrolysis Cell (AEMEC)
by
Katerina Maksimova-Dimitrova, Borislava Mladenova, Galin Borisov and Evelina Slavcheva
Inorganics 2024, 12(6), 153; https://doi.org/10.3390/inorganics12060153 - 31 May 2024
Abstract
The work presents novel composite catalytic materials—Ni and Co deposited on Magneli phase titania—and describes their complex characterization and integration into membrane electrode assemblies to produce hydrogen by electrochemical water splitting in cells with anion exchange membranes (AEMEC). Chemical composition, surface structure, and
[...] Read more.
The work presents novel composite catalytic materials—Ni and Co deposited on Magneli phase titania—and describes their complex characterization and integration into membrane electrode assemblies to produce hydrogen by electrochemical water splitting in cells with anion exchange membranes (AEMEC). Chemical composition, surface structure, and morphology were characterized by XRD and SEM analysis. The activity in the evolution of the partial electrode reactions of hydrogen (HER) and oxygen (OER) was assessed in an aqueous alkaline electrolyte (25 wt.% KOH) using linear sweep voltammetry. The interactive role of the support was investigated and discussed. Among the tested samples, the sample with 30 wt.% Co (Co30/MPT) demonstrated superior performance in the OER. The reaction started at 1.65 V, and at 1.8 V, the current density reached 75 mA cm−2. The HER is most efficient on the sample containing 40 wt.% Ni (Ni40/MPT), where the current density reaches 95 mA at a potential of −0.5 V. The change in catalytic efficiency compared to that of the unsupported Ni and Co is due to synergism resulting from electronic interactions between the transition metal having a hyper-d-electron character and hypo-d-electron support. The pre-selected catalysts were integrated in membrane electrode assembly (MEA) using commercial and laboratory-prepared anion-conductive membranes and tested in a custom-made AEMEC. The performance was compared to that of MEA with a commercial carbon-supported Pt catalyst. It was found that the MEA with newly prepared catalysts demonstrated better performance in long-term operation (50 mA cm−2 at 1.8 V in a 60 h durability test), which, combined with the higher cost efficiency, gave credence to considering this combination of materials as promising for AEMEC applications.
Full article
(This article belongs to the Special Issue Simulation-Aided Materials Design for Electrocatalysis)
►▼
Show Figures
Figure 1
Open AccessArticle
Biodegradable Ca2+ Doped Mesoporous Silica Nanoparticles Promote Chemotherapy Synergism with Calcicoptosis and Activate Anti-Tumor Immunity
by
Chao Liu, Xiaohui Tang and Gaofei Huang
Inorganics 2024, 12(6), 152; https://doi.org/10.3390/inorganics12060152 - 31 May 2024
Abstract
Mesoporous silica nanoparticles (MSNs), an excellent carrier material, have been widely used in tumor therapy as a vector for numerous therapeutic substances to boost therapeutical efficiency and specificity, such as loading them with chemotherapy drugs to improve the efficacy of chemotherapy. Nevertheless, they
[...] Read more.
Mesoporous silica nanoparticles (MSNs), an excellent carrier material, have been widely used in tumor therapy as a vector for numerous therapeutic substances to boost therapeutical efficiency and specificity, such as loading them with chemotherapy drugs to improve the efficacy of chemotherapy. Nevertheless, they still face hurdles, such as lack of specificity and poor efficacy of monotherapy. The construction of multifunctional MSNs with excellent therapeutic effects by introducing metal ions has attracted the attention of many researchers. Herein, we demonstrated a calcium doped, chemotherapy drug doxorubicin (Dox) loaded, specific degradation nanoplatform, prepared using the sol–gel method by introducing calcium ions into an MSN framework, which enabled the doped nanoplatform to enhance chemotherapy and activate anti-tumor immune response. As a proof of concept, the doping of Ca2+ endowed MSNs with excellent specific degradation and pH responsive drug release, and enabled the synergy of chemotherapy and calcicoptosis. Furthermore, this nanoplatform also effectively elicited immunogenic cell death (ICD) and promoted the maturation of dendritic cells (DCs), realizing the activation of the anti-tumor immune system. The Ca2+ doped MSNs (CMSNs), that can activate immune response with specific degradation capability, demonstrate a practical strategy for the effective synergy between chemotherapy and calcicoptosis, providing a new paradigm for promoting chemotherapy-related treatment.
Full article
(This article belongs to the Special Issue Functional Inorganic Biomaterials for Molecular Sensing and Biomedical Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Growth of KNbO3 Single Crystals by the Flux Method Using KBO2 as a Flux
by
Thanh Trung Doan, John G. Fisher, Jong-Sook Lee, Huyen Tran Tran, Jie Gao, Jungwi Mok, Junseong Lee, Andreja Benčan, Goran Dražić, Syed Bilal Junaid and Jae-Hyeon Ko
Inorganics 2024, 12(6), 151; https://doi.org/10.3390/inorganics12060151 - 30 May 2024
Abstract
KNbO3 single crystals are grown by the self-flux method using K2CO3 as a flux, but often suffer from discolouration. In this work, KNbO3 single crystals were grown by the flux method using KBO2 as a flux. KNbO
[...] Read more.
KNbO3 single crystals are grown by the self-flux method using K2CO3 as a flux, but often suffer from discolouration. In this work, KNbO3 single crystals were grown by the flux method using KBO2 as a flux. KNbO3 powder was prepared by the solid-state reaction of K2CO3 and Nb2O5. KBO2 was fabricated by the reaction of K2B4O7·4H2O and K2CO3. Single crystals of KNbO3 were grown in a Pt crucible and the structure and dielectric properties of the single crystals were investigated. X-ray diffraction showed the KNbO3 single crystals to have an orthorhombic Cmm2 perovskite unit cell at room temperature. The existence of ferroelastic domains was revealed by transmission electron microscopy. Electron probe microanalysis showed the single crystals to be stoichiometric and contain small amounts of B. Differential thermal analysis, Raman scattering and impedance spectroscopy were used to study the phase transitions. KBO2 may be a suitable flux for the growth of KNbO3 single crystals.
Full article
(This article belongs to the Special Issue The State of the Art of Research on Perovskites Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Synthesis Conditions on the Photoluminescent Properties of Si-Substituted CaYAlO4:Eu: Sources of Experimental Errors in Solid-State Synthesis
by
Ju Hyun Oh, Yookyoung Lee, Jihee Kim, Woo Tae Hong, Hyun Kyoung Yang, Mijeong Kang and Seunghun Lee
Inorganics 2024, 12(6), 150; https://doi.org/10.3390/inorganics12060150 - 30 May 2024
Abstract
To improve the luminescent efficiency of and to design the color spectrum of phosphors, the comprehensive understanding of the correlation between physical parameters and luminescent properties is imperative, necessitating systematic experimental studies. However, unintentional variations across individually prepared samples impede the thorough investigation
[...] Read more.
To improve the luminescent efficiency of and to design the color spectrum of phosphors, the comprehensive understanding of the correlation between physical parameters and luminescent properties is imperative, necessitating systematic experimental studies. However, unintentional variations across individually prepared samples impede the thorough investigation of the correlation. In this study, we investigate the possible sources of unintentional variation in the photoluminescence properties of phosphors during sample preparation using a solid-state reaction, explicitly focusing on the ball milling process. Based on the quantitative features of the photoluminescent properties and their associated statistical errors, we explore the impact of unintentional variation alongside intended systematic variation, highlighting its potential to obscure meaningful trends.
Full article
(This article belongs to the Special Issue Synthesis and Application of Luminescent Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Discovering Novel Glass with Robust Crystallization Resistance via Amorphous Phase Separation Engineering
by
Mou Deng, Mingzhong Wang, Yu Rao, Yinsheng Xu, Dong Wu, Shisheng Lin and Ping Lu
Inorganics 2024, 12(6), 149; https://doi.org/10.3390/inorganics12060149 - 29 May 2024
Abstract
Amorphous phase separation (APS) is ubiquitously found in a large number of glass systems, because the glass can be regarded as solid with a heterogeneous structure at the nanoscale. However, little attention has been paid to the big challenges in utilizing APS in
[...] Read more.
Amorphous phase separation (APS) is ubiquitously found in a large number of glass systems, because the glass can be regarded as solid with a heterogeneous structure at the nanoscale. However, little attention has been paid to the big challenges in utilizing APS in searching novel amorphous glass from above to below, which highlights the meticulous microstructure tunability of glass. Correspondingly, we develop a novel SiO2-Al2O3-P2O5-Li2O-ZrO2 glass with APS (SAPLZ APS) which has robust crystallization resistance via the APS engineering. A comparative study is conducted to reveal the APS–crystallization property relationship. It can be found that the introduced APS can substantially impede the precipitated crystal growth in the studied glass system. Considering detailed glassy structure and microstructure, a diffusion barrier around each Li-rich droplet is created by the presence of P5+ concentration surrounding the Li-rich region. Meanwhile, due to the increase in Q4 at the expense of Q3, the polymerization degree in the Si-rich amorphous area can be enhanced, further increasing its viscosity and raising the kinetic barrier of Si-related crystal growth. These findings provide a new manner to develop new glass with superior anti-crystallization performance.
Full article
(This article belongs to the Special Issue Recent Research and Application of Amorphous Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Functionalization of Strontium Ferrite Nanoparticles with Novel Chitosan–Schiff Base Ligand for Efficient Removal of Pb(II) Ions from Aqueous Media
by
Asma S. Al-Wasidi and Ehab A. Abdelrahman
Inorganics 2024, 12(6), 148; https://doi.org/10.3390/inorganics12060148 - 29 May 2024
Abstract
►▼
Show Figures
Lead contamination in water poses significant health risks, making its removal imperative. In this study, magnetic strontium ferrite (SrFe12O19) nanoparticles were facilely synthesized by the Pechini sol–gel method and subsequently functionalized with a novel chitosan–Schiff base ligand to obtain
[...] Read more.
Lead contamination in water poses significant health risks, making its removal imperative. In this study, magnetic strontium ferrite (SrFe12O19) nanoparticles were facilely synthesized by the Pechini sol–gel method and subsequently functionalized with a novel chitosan–Schiff base ligand to obtain a novel inorganic/organic nanocomposite for removing Pb(II) ions from aqueous solutions. The chitosan–Schiff base ligand was synthesized through the reaction of chitosan with 2,4,5-trihydroxybenzaldehyde. The presence of two X-ray diffraction (XRD) peaks at 2Ɵ = 10.5° and 2Ɵ = 20.5°, alongside the characteristic SrFe12O19 peaks, confirmed the functionalization of the nanoparticles with the ligand. Additionally, a significant decrease in the saturation magnetization value from 40.29 emu/g in pure SrFe12O19 nanoparticles to 17.32 emu/g in the nanocomposite further verified the functionalization. The presence of carbon (C) and nitrogen (N) atoms in the energy-dispersive X-ray (EDX) pattern of the nanocomposite, in addition to iron (Fe), strontium (Sr), and oxygen (O), also confirmed the functionalization. The nanocomposite’s maximum adsorption capacity for Pb(II) ions was 390.63 mg/g. Moreover, the adsorption process is endothermic, spontaneous, and chemical, occurring via complexation with -C=N and -OH groups, and it fits well with the Langmuir equilibrium isotherm and the pseudo-second-order kinetic equation.
Full article
Figure 1
Open AccessArticle
Cyanide Addition to Diiron and Diruthenium Bis-Cyclopentadienyl Complexes with Bridging Hydrocarbyl Ligands
by
Alessia Cinci, Gianluca Ciancaleoni, Stefano Zacchini and Fabio Marchetti
Inorganics 2024, 12(6), 147; https://doi.org/10.3390/inorganics12060147 - 28 May 2024
Abstract
We conducted a joint synthetic, spectroscopic and computational study to explore the reactivity towards cyanide (from Bu4NCN) of a series of dinuclear complexes based on the M2Cp2(CO)3 scaffold (M = Fe, Ru; Cp = η5
[...] Read more.
We conducted a joint synthetic, spectroscopic and computational study to explore the reactivity towards cyanide (from Bu4NCN) of a series of dinuclear complexes based on the M2Cp2(CO)3 scaffold (M = Fe, Ru; Cp = η5-C5H5), namely [M2Cp2(CO)2(µ-CO){µ,η1:η2-CH=C=CMe2}]BF4 (1Fe-Ru), [Ru2Cp2(CO)2(µ-CO){µ,η1:η2-C(Ph)=CHPh}]BF4 (2Ru) and [M2Cp2(CO)2(µ-CO){µ-CN(Me)(R)}]CF3SO3 (3Fe-Ru). While the reaction of 1Fe with Bu4NCN resulted in prevalent allenyl deprotonation, preliminary CO-NCMe substitution in 1Ru enabled cyanide addition to both the allenyl ligand (resulting in the formation of a h1:h2-allene derivative, 5A) and the two metal centers (affording 5B1 and 5B2). The mixture of 5B1-2 was rapidly converted into 5A in heptane solution at 100 °C, with 5A being isolated with a total yield of 60%. Following carbonyl-chloride substitution in 2Ru, CN− was incorporated as a terminal ligand upon Cl− displacement, to give the alkenyl complex 6 (84%). The reactivity of 3Fe and 3Ru is strongly influenced by both the metal element, M, and the aminocarbyne substituent, R. Thus, 7aRu was obtained with a 74% yield from cyanide attack on the carbyne in 3aRu (R = Cy, cyclohexyl), whereas the reaction involving the diiron counterpart 3aFe yielded an unclean mixture of the metastable 7aFe and the CO/CN− substitution product 8aFe. The cyano-alkylidene complexes 7aRu (R = Cy) and 7bFe (R = Me) underwent CO loss and carbene to carbyne conversion in isopropanol at 60–80 °C, giving 8aRu (48%) and 8bFe (71%), respectively. The novel compounds 5A, 5B1-2, 6 and 7aRu were characterized by IR and NMR spectroscopy, with the structure of 7aRu further elucidated by single crystal X-ray diffraction analysis. Additionally, the DFT-optimized structures of potential isomers of 5A, 5B1-2 and 6 were calculated.
Full article
(This article belongs to the Special Issue Binuclear Complexes II)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Lanthanide-Containing Polyoxometalate Crystallized with Bolaamphiphile Surfactants as Inorganic–Organic Hybrid Phosphors
by
Rieko Ishibashi, Ruka Koike, Yoriko Suda, Tatsuhiro Kojima, Toshiyuki Sumi, Toshiyuki Misawa, Kotaro Kizu, Yosuke Okamura and Takeru Ito
Inorganics 2024, 12(6), 146; https://doi.org/10.3390/inorganics12060146 - 23 May 2024
Abstract
Lanthanide elements such as europium exhibit distinctive emissions due to the transitions of inner-shell 4f electrons. Inorganic materials containing lanthanide elements have been widely used as phosphors in conventional displays. The hybridization of lanthanide ions with organic components enables to control of the
[...] Read more.
Lanthanide elements such as europium exhibit distinctive emissions due to the transitions of inner-shell 4f electrons. Inorganic materials containing lanthanide elements have been widely used as phosphors in conventional displays. The hybridization of lanthanide ions with organic components enables to control of the material’s shapes and properties and broadens the possibility of lanthanide compounds as inorganic–organic materials. Lanthanide ion-containing polyoxometalate anions (Ln-POM) are a promising category as an inorganic component to design and synthesize inorganic–organic hybrids. Several inorganic–organic Ln-POM systems have been reported by hybridizing with cationic surfactants as luminescent materials. However, single-crystalline ordering has not been achieved in most cases. Here, we report syntheses and structures of inorganic–organic hybrid crystals of lanthanide-based POM and bolaamphiphile surfactants with two hydrophilic heads in one molecule. An emissive decatungstoeuropate ([EuW10O36]9−, EuW10) anion was employed as a lanthanide source. The bolaamphiphile counterparts are 1,8-octamethylenediammonium ([H3N(CH2)8NH3]2+, C8N2) and 1,10-decamethylenediammonium ([H3N(CH2)10NH3]2+, C10N2). Both hybrid crystals of C8N2-EuW10 and C10N2-EuW10 were successfully obtained as single crystals, and their crystal structures were unambiguously determined using X-ray diffraction measurements. The photoluminescence properties of C8N2-EuW10 and C10N2-EuW10 were investigated by means of steady-state and time-resolved spectroscopy. The characteristic emission derived from the EuW10 anion was retained after the hybridization process.
Full article
(This article belongs to the Special Issue Synthesis and Application of Luminescent Materials)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Inorganics Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Catalysts, Chemistry, Inorganics, Molbank, Molecules, Polymers
Heterocyclic Carbene Catalysis
Topic Editors: Sabine Berteina-Raboin, Thierry Besson, Patrick RollinDeadline: 30 November 2024
Topic in
Catalysts, Crystals, Inorganics, Materials, Molecules, Solids
Advances in Inorganic Synthesis
Topic Editors: Andrei V. Shevelkov, Maxim N. SokolovDeadline: 31 December 2024
Topic in
Chemistry, Inorganics, Molecules, IJMS
Recent Advances in Coumarin Derivatives and Their Metal Complexes
Topic Editors: Dušan Dimić, Edina Avdović, Dejan MilenkovićDeadline: 28 February 2025
Conferences
Special Issues
Special Issue in
Inorganics
Mixed Metal Oxides II
Guest Editor: Aivaras KareivaDeadline: 25 June 2024
Special Issue in
Inorganics
Novel Functional Ceramics
Guest Editors: Oana-Cătălina Mocioiu, Ana-Maria MocioiuDeadline: 20 July 2024
Special Issue in
Inorganics
Research on Ferrocene and Ferrocene-Containing Compounds
Guest Editors: Mojca Čakić Semenčić, Lidija BarišićDeadline: 31 July 2024
Special Issue in
Inorganics
Rational Design of Pharmacologically Active Metal-Based Compounds
Guest Editors: Irena Kostova, Luciano SasoDeadline: 31 August 2024
Topical Collections
Topical Collection in
Inorganics
Coordination Complexes for Dye-Sensitized Solar Cells (DSCs)
Collection Editor: Catherine Housecroft